INTERNET-DRAFT Sean Harnedy Mangrove Systems, Inc. Expires: April 2005 Bhargavi Shah Fabric Networks Corp. Bill Swortwood Motorola Corporation October 2004 Definitions of Managed Objects for the InfiniBand Subnet Management Agent (SMA) Status of this Memo By submitting this Internet-Draft, each author represents that any applicable patent or other IPR claims of which he or she is aware have been or will be disclosed, and any of which he or she becomes aware will be disclosed, in accordance with Section 6 of RFC 3668. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF), its areas, and its working groups. Note that other groups may also distribute working documents as Internet-Drafts. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." The list of current Internet-Drafts can be accessed at http://www.ietf.org/ietf/1id-abstracts.txt The list of Internet-Draft Shadow Directories can be accessed at http://www.ietf.org/shadow.html Abstract InfiniBand Architecture (IBA) specifies a high speed, channel based, switched fabric architecture that delivers scalable performance in data centers. This memo defines a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. In particular, it defines objects for managing InfiniBand Subnet Management Agents (SMA). Copyright Notice Copyright (C) The Internet Society (2004). All Rights Reserved. Expires April 2005 [Page 1] Internet-Draft IPOVERIB SMA MIB Module October 2004 Table of Contents 1. Introduction ................................................ 3 2. The Internet-Standard Management Framework .................. 3 3. Structure of the MIB ........................................ 3 3.1. Overview .................................................. 3 3.2. Discussion of MIB Groups .................................. 4 3.3. The SMA MIB Objects ....................................... 4 3.3.1. The Node Info Group ..................................... 4 3.3.2. The Switch Info Group ................................... 4 3.3.3. The GUID Info Group ..................................... 4 3.3.4. The Management Port Info Group .......................... 4 3.3.5. The Data Port Info Group ................................ 4 3.3.6. The Partition Key Group ................................. 4 3.3.7. The Service-Level-to-Virtual-Lane-Mapping Group ......... 4 3.3.8. The Virtual Lane Arbitration Group ...................... 5 3.3.9. The Linear Forwarding Group ............................. 5 3.3.10. The Random Forwarding Group ............................ 5 3.3.11. The Multicast Forwarding Group ......................... 5 3.3.12. The Subnet Manager Info Group .......................... 5 3.3.13. The Vendor Diagnostics Group ........................... 5 3.3.14. The LED Info Group ..................................... 5 3.4. The SMA Notifications Group ............................... 5 3.4.1. SMA Notifications ....................................... 5 3.5. The SMA Conformance Group ................................. 5 3.5.1. SMA Compliance Groups ................................... 6 4. IPOIB SMA MIB Definitions ................................... 6 5. Acknowledgments ............................................. 67 6. Security Considerations ..................................... 67 7. IANA Considerations ......................................... 67 8. References .................................................. 68 8.1. Normative References ...................................... 68 8.2. Informative References .................................... 68 9. Authors' Addresses .......................................... 68 10. Intellectual Property Notice ............................... 69 11. Full Copyright Statement ................................... 69 Expires April 2005 [Page 2] Internet-Draft IPOVERIB SMA MIB Module October 2004 1. Introduction This document defines a MIB for the InfiniBand Subnet Management Agent (SMA). The InfiniBand Architecture [INFINIV1] is defined by the InfiniBand Trade Association. InfiniBand is designed to provide low latency high bandwidth interconnect in a computing environment. This document will define the objects related to managing the Subnet Management Agent on each device in an InfiniBand Fabric. Each InfiniBand node -- switch, channel adapter (CA), or router -- includes a managed entity called the Subnet Management Agent (SMA). All SMAs in an InfiniBand subnet are managed by the master Subnet Manager (SM). The SMA receives and transmits the class of Management Datagrams (MAD) called Subnet Management Packets (SMP) when it communicates with the SM. Note: SMPs never travel beyond the boundaries of its local InfiniBand subnet. Also, SMPs always use Virtual Lane 15 (VL15) and are exclusively addressed to Queue Pair 0 (QP0). The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT" "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in RFC 2119 [RFC2119]. 2. The Internet-Standard Management Framework For a detailed overview of the documents that describe the current Internet-Standard Management Framework, please refer to section 7 of RFC 3410 [RFC3410]. Managed objects are accessed via a virtual information store, termed the Management Information Base or MIB. MIB objects are generally accessed through the Simple Network Management Protocol (SNMP). Objects in the MIB are defined using the mechanisms defined in the Structure of Management Information (SMI). This memo specifies a MIB module that is compliant to the SMIv2, which is described in STD 58, RFC 2578 [RFC2578], STD 58, RFC 2579 [RFC2579] and STD 58, RFC 2580 [RFC2580]. 3. Structure of the MIB This section describes the structure of the IPOIB SMA MIB. 3.1. Overview The SNMP management of the SMA involves the monitoring of key subnet management attributes. Expires April 2005 [Page 3] Internet-Draft IPOVERIB SMA MIB Module October 2004 3.2. Discussion of MIB Groups The SMA MIB is divided into three basic groups: MIB objects, events (notifications), and the conformance section. 3.3. The SMA MIB Objects The SMA MIB objects primarily correlate to the Subnet Management Attributes as defined in Table 116 Subnet Management Attributes (Summary) from InfiniBand Architecture Release 1.1. Vol. 1. [INFINIV1]. These attributes are organized into fourteen major SMA MIB groups. These are: The Node Info Group, The Switch Info Group, The GUID Info Group, the Management Port Info Group, the Data Port Info Group, the Partition Key Group, the Service-Level-to-Virtual-Lane-Mapping Group, the Virtual Lane Arbitration Group, the Linear Forwarding Group, the Random Forwarding Group, the Multicast Forwarding Group, the Subnet Manager Info Group, the Vendor Diagnostics Group, and the LED Info Group. 3.3.1. The Node Info Group This group provides node-level information common to any InfiniBand node (switch, router, or CA). 3.3.2. The Switch Info Group This group contains management information about InfiniBand switches. 3.3.3. The GUID Info Group This group contains the assigned local scope EUI-64 IEEE-defined 64-bit extended unique identifier (EUI-64) identifiers for CAs, routers, and switch management ports. 3.3.4. The Management Port Info Group This group contains management information about the management port. 3.3.5. The Data Port Info Group This group contains management information about the data ports. 3.3.6. The Partition Key Group This group contains a table with information about the Partition Keys (P-Keys). 3.3.7. The Service-Level-to-Virtual-Lane (SLToVL) Mapping Group This group contains the SLToVL Mapping Table that allows the mapping of Virtual Lanes to Service Levels. Expires April 2005 [Page 4] Internet-Draft IPOVERIB SMA MIB Module October 2004 3.3.8. The Virtual Lane Arbitration Group This group contains the table that can be used to examine the VL arbitration for the node's ports. 3.3.9. The Linear Forwarding Group This group contains information about the Linear Unicast Forwarding Table. 3.3.10. The Random Forwarding Group This group contains information about the Random Unicast Forwarding Table. 3.3.11. The Multicast Forwarding Group This group contains information about the Multicast Forwarding Table. 3.3.12. The Subnet Manager Info Group This group contains information that the Subnet Manager can use for its tasks of subnet discovery, polling, etc. 3.3.13. The Vendor Diagnostics Group This group contains vendor-specific diagnostic information. 3.3.14. The LED Info Group This group contains information about the node's LEDs. 3.4. The SMA Notifications Group The SMA Notifications Group contains the definitions for the agent events. 3.4.1. SMA Notifications Currently, there are several notifications which are specific for the SMA MIB. These include the mapping of the InfiniBand Traps to SNMP notifications. The InfiniBand traps are summarized in Table 118 Traps (Section 14.2.5.1) from InfiniBand Architecture Release 1.1 Vol. 1. [INFINIV1] 3.5. The SMA Conformance Group The SMA Conformance Group lists the possible compliances for various types of InfiniBand nodes (basic, full switch and full router/channel adapter), and the units of conformance which define the constituent object groups. Expires April 2005 [Page 5] Internet-Draft IPOVERIB SMA MIB Module October 2004 3.5.1. SMA Compliance Groups The Compliance Groups list acceptable MIB implementation requirements. 4. IPOIB SMA MIB Definitions IB-SMA-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Counter32, NOTIFICATION-TYPE, Unsigned32 FROM SNMPv2-SMI TruthValue FROM SNMPv2-TC SnmpAdminString FROM SNMP-FRAMEWORK-MIB MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF IbDataPort, IbDataPortAndInvalid, IbGuid, IbUnicastLid, IbMulticastLid, IbSmPortList, infinibandMIB FROM IB-TC-MIB; ibSmaMIB MODULE-IDENTITY LAST-UPDATED "200410151200Z" -- 15 October 2004 12:00:00 GMT ORGANIZATION "IETF IP Over IB (IPOIB) Working Group" CONTACT-INFO "Sean Harnedy (sharnedy@mangrovesystems.com) Mangrove Systems, Inc. Bhargavi Shah (bshah@fabricnetworks.com) Fabric Networks Corporation Bill Swortwood (Bill.Swortwood@motorola.com) Motorola Corporation Email comments to the IPOIB WG Mailing List at ipoverib@ietf.org." DESCRIPTION "Copyright (C) The Internet Society (2004). The initial version of this MIB module was published in RFC XXXX; for full legal notices see the RFC itself. Supplementary information may be available on http://www.ietf.org/copyrights/ianamib.html. This module contains managed object definitions for the Subnet Management Agent instrumentation for an InfiniBand Subnet Management Agent (SMA)." REVISION "200410151200Z" -- 15 October 2004 12:00:00 GMT DESCRIPTION "Initial version published as part of RFC XXXX." ::= { infinibandMIB 3 } Expires April 2005 [Page 6] Internet-Draft IPOVERIB SMA MIB Module October 2004 --**************************************************************** -- Object Identifiers for the IPOIB SMA MIB --**************************************************************** ibSmaObjects OBJECT IDENTIFIER ::= { ibSmaMIB 1 } ibSmaNotifications OBJECT IDENTIFIER ::= { ibSmaMIB 2 } ibSmaConformance OBJECT IDENTIFIER ::= { ibSmaMIB 3 } --**************************************************************** -- Node Info Group --**************************************************************** ibSmaNodeInfo OBJECT IDENTIFIER ::= { ibSmaObjects 1 } --**************************************************************** -- NodeInfo Scalars Group -- -- DESCRIPTION: This group contains scalar variables that describe -- information about the node. It also contains objects that can -- be used to monitor the behavior of this node via information -- provided by the SMA. --**************************************************************** ibSmaNodeString OBJECT-TYPE SYNTAX SnmpAdminString(SIZE(1..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "The node description. This is the Node description string from the NodeDescription attribute. The contents of the NodeDescription attribute is the same for all ports on a node." REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.2; Table 127 NodeDescription." ::= { ibSmaNodeInfo 1 } ibSmaNodeBaseVersion OBJECT-TYPE SYNTAX Unsigned32(1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The supported Management Datagram (MAD) base version. This value indicates that the node supports up to and including this version. This value is the same for all ports on a node. (NOTE: for InfiniBand Release 1 this value should be set to 1.)" REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.3; Table 128 NodeInfo." ::= { ibSmaNodeInfo 2 } ibSmaNodeClassVersion OBJECT-TYPE SYNTAX Unsigned32(1..255) MAX-ACCESS read-only STATUS current Expires April 2005 [Page 7] Internet-Draft IPOVERIB SMA MIB Module October 2004 DESCRIPTION "The supported Subnet Management Class (SMP) version. This value indicates that the node supports up to and including this version. This value is the same for all ports on a node. (NOTE: for InfiniBand Release 1 this value should be set to 1.)" REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.3; Table 128 NodeInfo." ::= { ibSmaNodeInfo 3 } ibSmaNodeType OBJECT-TYPE SYNTAX INTEGER { channelAdapter(1), switch(2), router(3), reserved(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Type of IBA device this SMA is supporting. InfiniBand types are 1: Channel Adapter 2: Switch 3: Router 0,4-255: reserved" REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.3; Table 128 NodeInfo." ::= { ibSmaNodeInfo 4 } ibSmaNodeNumPorts OBJECT-TYPE SYNTAX Unsigned32(0..254) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of physical InfiniBand ports on this node." REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.3; Table 128 NodeInfo." ::= { ibSmaNodeInfo 5 } ibSmaSystemImageGuid OBJECT-TYPE SYNTAX IbGuid MAX-ACCESS read-only STATUS current DESCRIPTION "The GUID of this node that associates this node with other nodes in the same administrative domain. These nodes are controlled by common supervisory code. This object provides a way for system software to indicate the availability of multiple paths to the Expires April 2005 [Page 8] Internet-Draft IPOVERIB SMA MIB Module October 2004 same destination via multiple nodes. If this value is 0, there is no association. This object may be equal to the ibSmaNodeGuid of one of the associated nodes if that node is not field-replaceable." REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.3; Table 128 NodeInfo." ::= { ibSmaNodeInfo 6 } ibSmaNodeGuid OBJECT-TYPE SYNTAX IbGuid MAX-ACCESS read-only STATUS current DESCRIPTION "The GUID of this node. The node can be a Host Channel Adpater (HCA), Terminal Channel Adapter (TCA), switch, or router. All ports on the same node shall report the same NodeGUID value. This provides a means for uniquely identifying a node within a subnet and helps to determine the co-location of the ports." REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.3; Table 128 NodeInfo." ::= { ibSmaNodeInfo 7 } ibSmaNodePortGuid OBJECT-TYPE SYNTAX IbGuid MAX-ACCESS read-only STATUS current DESCRIPTION "The node port GUID. One port within a node can return the NodeGUID as its PortGUID if the port is an integral part of the node and is not field-replaceable." REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.3; Table 128 NodeInfo." ::= { ibSmaNodeInfo 8 } ibSmaNodePartitionTableNum OBJECT-TYPE SYNTAX Unsigned32(1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Number of entries in the Partition Table for CA, router, and the switch management port. This is at a minimum set to 1 for all nodes including switches. This value shall be the same for all ports on a node." REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.3; Table 128 NodeInfo." ::= { ibSmaNodeInfo 9 } Expires April 2005 [Page 9] Internet-Draft IPOVERIB SMA MIB Module October 2004 ibSmaNodeDeviceId OBJECT-TYPE SYNTAX OCTET STRING(SIZE(2)) MAX-ACCESS read-only STATUS current DESCRIPTION "Device ID information as assigned by the device manufacturer. This value shall be the same for all ports on a node." REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.3; Table 128 NodeInfo." ::= { ibSmaNodeInfo 10 } ibSmaNodeRevision OBJECT-TYPE SYNTAX OCTET STRING(SIZE(4)) MAX-ACCESS read-only STATUS current DESCRIPTION "Manufacturer assigned device revision. This value shall be the same for all ports on a node." REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.3; Table 128 NodeInfo." ::= { ibSmaNodeInfo 11 } ibSmaNodeLocalPortNumOrZero OBJECT-TYPE SYNTAX Unsigned32(0..254) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of the IBA port which received this SNMP request. If the port is unknown a 0 is returned." REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.3; Table 128 NodeInfo." ::= { ibSmaNodeInfo 12 } ibSmaNodeVendorId OBJECT-TYPE SYNTAX OCTET STRING(SIZE(3)) MAX-ACCESS read-only STATUS current DESCRIPTION "IEEE specified device vendor identifier. This value shall be the same for all ports on a node." REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.3; Table 128 NodeInfo." ::= { ibSmaNodeInfo 13 } -- -- Objects required for Notification variable binding lists. -- Expires April 2005 [Page 10] Internet-Draft IPOVERIB SMA MIB Module October 2004 ibSmaNodeLid OBJECT-TYPE SYNTAX Unsigned32(0..65535) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Local Identifier value. Used for notification var bind list object. Retrieved from InfiniBand traps 128, 129, 130, 131, 144, 145, 256, 257, 258, and 259." REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.1; Tables 119 -- 126 Traps and Notice Data Details For Traps nnn." ::= { ibSmaNodeInfo 14 } ibSmaNodePortNum OBJECT-TYPE SYNTAX IbDataPort MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Port number. Used for notification var bind list object. Retrieved from InfiniBand traps 129, 130, 131, and 259." REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.1; Tables 119 -- 126 Traps and Notice Data Details For Traps nnn." ::= { ibSmaNodeInfo 15 } ibSmaNodeMethod OBJECT-TYPE SYNTAX Unsigned32(0..255) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Method. Used for notification var bind list object. Retrieved from InfiniBand trap 256." REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.1; Tables 119 -- 126 Traps and Notice Data Details For Traps nnn." ::= { ibSmaNodeInfo 16 } ibSmaNodeAttributeId OBJECT-TYPE SYNTAX Unsigned32(0..65535) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Attribute ID. Used for notification var bind list object. Retrieved from InfiniBand trap 256." REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.1; Tables 119 -- 126 Traps and Notice Data Details For Traps nnn." ::= { ibSmaNodeInfo 17 } Expires April 2005 [Page 11] Internet-Draft IPOVERIB SMA MIB Module October 2004 ibSmaNodeAttributeModifier OBJECT-TYPE SYNTAX Unsigned32(0..4294967295) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Attribute Modifier. Used for notification var bind list object. Retrieved from InfiniBand trap 256." REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.1; Tables 119 -- 126 Traps and Notice Data Details For Traps nnn." ::= { ibSmaNodeInfo 18 } ibSmaNodeKey OBJECT-TYPE SYNTAX OCTET STRING(SIZE(8)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "M_Key, Q_Key or P_Key. Used for notification var bind list object. Retrieved from InfiniBand traps 256, 257, 258, and 259. Note: If it is a P_Key, the 16 most significant bits of the field shall be set to 0 and the least significant bits of the field will be set to the P_Key." REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.1; Tables 119 -- 126 Traps and Notice Data Details For Traps nnn." ::= { ibSmaNodeInfo 19 } ibSmaNodeLid2 OBJECT-TYPE SYNTAX Unsigned32(0..65535) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "To Local Identifier (LID). Used for notification var bind list object. Retrieved from InfiniBand traps 257, 258, and 259." REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.1; Tables 119 -- 126 Traps and Notice Data Details For Traps nnn." ::= { ibSmaNodeInfo 20 } ibSmaNodeServiceLevel OBJECT-TYPE SYNTAX Unsigned32(0..15) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Service Level. Used for notification var bind list object. Retrieved from InfiniBand traps 257, 258, and 259." REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.1; Tables 119 -- 126 Traps and Notice Data Details For Traps nnn." ::= { ibSmaNodeInfo 21 } Expires April 2005 [Page 12] Internet-Draft IPOVERIB SMA MIB Module October 2004 ibSmaNodeQueuePair1 OBJECT-TYPE SYNTAX Unsigned32(0..16777215) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Queue Pair (QP) 1. Used for notification var bind list object. Retrieved from InfiniBand traps 257, 258, and 259." REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.1; Tables 119 -- 126 Traps and Notice Data Details For Traps nnn." ::= { ibSmaNodeInfo 22 } ibSmaNodeQueuePair2 OBJECT-TYPE SYNTAX Unsigned32(0..16777215) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Queue Pair (QP) 2. Used for notification var bind list object. Retrieved from InfiniBand traps 257, 258, and 259." REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.1; Tables 119 -- 126 Traps and Notice Data Details For Traps nnn." ::= { ibSmaNodeInfo 23 } ibSmaNodeGid1 OBJECT-TYPE SYNTAX OCTET STRING(SIZE(16)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Global Identifier 1. Used for notification var bind list object. Retrieved from InfiniBand traps 64, 65, 66, 67, 257, 258, and 259. Note: If no Global Routing Header (GRH) is present in the offending packet, this value will be all zeros." REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.1; Tables 119 -- 126 Traps and Notice Data Details For Traps nnn." ::= { ibSmaNodeInfo 24 } ibSmaNodeGid2 OBJECT-TYPE SYNTAX OCTET STRING(SIZE(16)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Global Identifier 2. Used for notification var bind list object. Retrieved from InfiniBand traps 257, 258, and 258. Note: If no GRH is present in the offending packet, this value will be all zeros." REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.1; Tables 119 -- 126 Traps and Notice Data Expires April 2005 [Page 13] Internet-Draft IPOVERIB SMA MIB Module October 2004 Details For Traps nnn." ::= { ibSmaNodeInfo 25 } ibSmaNodeCapMask OBJECT-TYPE SYNTAX OCTET STRING(SIZE(4)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Contents of Capability Mask. Retrieved from InfiniBand trap 144." REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.1; Tables 119 -- 126 Traps and Notice Data Details For Traps nnn." ::= { ibSmaNodeInfo 26 } ibSmaNodeSwitchLid OBJECT-TYPE SYNTAX Unsigned32(0..65535) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The switch Local Identifier (LID). Used for notification var bind list object. Retrieved from InfiniBand traps 259." REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.1; Tables 119 -- 126 Traps and Notice Data Details For Traps nnn." ::= { ibSmaNodeInfo 27 } ibSmaNodeDataValid OBJECT-TYPE SYNTAX BITS { lidaddr1(0), lidaddr2(1), pkey(2), sl(3), qp1(4), qp2(5), gidaddr1(6), gidaddr2(7) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Data valid field retrieved from InfiniBand trap 259. It is a bit mask. If the bit is set, the field is valid. bit 0: LIDADDR1 bit 1: LIDADDR2 bit 2: PKEY bit 3: SL bit 4: QP1 bit 5: QP2 bit 6: GIDADDR1 bit 7: GIDADDR2 Expires April 2005 [Page 14] Internet-Draft IPOVERIB SMA MIB Module October 2004 bit 8-15: reserved (0)." REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.1; Tables 119 -- 126 Traps and Notice Data Details For Traps nnn." ::= { ibSmaNodeInfo 28 } --**************************************************************** -- Switch Info Group --**************************************************************** ibSmaSwitchInfo OBJECT IDENTIFIER ::= { ibSmaObjects 2 } --**************************************************************** -- SwitchInfo Scalars Group -- -- DESCRIPTION: This group contains scalar variables that describe -- information about an InfiniBand switch. This group shall be -- implemented by all switches. --**************************************************************** ibSmaSwLinearFdbTableNum OBJECT-TYPE SYNTAX Unsigned32(0..49151) MAX-ACCESS read-only STATUS current DESCRIPTION "Number of entries in the Linear Forwarding Data Base. This is the number of entries supported in the Linear Unicast Forwarding Table (starting at LID=0x0000 and going up). The InfiniBand SwitchInfo component is called LinearFDBCap. When the count is 0, this indicates that there is no Linear Forwarding Database present." REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.4; Table 129 SwitchInfo." ::= { ibSmaSwitchInfo 1 } ibSmaSwRandomFdbTableNum OBJECT-TYPE SYNTAX Unsigned32(0..49151) MAX-ACCESS read-only STATUS current DESCRIPTION "Number of entries in the Random Forwarding Data Base. This is the number of entries supported in the Random Unicast Forwarding Table. The InfiniBand SwitchInfo component is called RandomFDBCap. When the count is 0, this indicates that there is no Random Forwarding Database present." REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.4; Table 129 SwitchInfo." ::= { ibSmaSwitchInfo 2 } Expires April 2005 [Page 15] Internet-Draft IPOVERIB SMA MIB Module October 2004 ibSmaSwMulticastFdbTableNum OBJECT-TYPE SYNTAX Unsigned32(0..16383) MAX-ACCESS read-only STATUS current DESCRIPTION "Number of entries in the Multicast Forwarding Data Base. This is the number of entries supported in the Multicast Forwarding Table (starting at LID=0xC000 and going up). The InfiniBand SwitchInfo component is called MulticastFDBCap." REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.4; Table 129 SwitchInfo." ::= { ibSmaSwitchInfo 3 } ibSmaSwLinearFdbTop OBJECT-TYPE SYNTAX Unsigned32(0..49151) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the top of the linear forwarding database. Packets received with unicast DLIDs greater than this value are discarded by the switch. A valid LinearFdbTop is less than LinearFdbCap. This component applies only to switches that implement linear forwarding tables and is ignored by switches that implement random forwarding tables. For the latter cases a 0 is returned." REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.4; Table 129 SwitchInfo." ::= { ibSmaSwitchInfo 4 } ibSmaSwDefaultPort OBJECT-TYPE SYNTAX Unsigned32(0..254) MAX-ACCESS read-only STATUS current DESCRIPTION "Default forwarding port for unicast packets from the other ports whose DLID does not exist in the random forwarding table. If the port number is unknown, a 0 is returned." REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.4; Table 129 SwitchInfo." ::= { ibSmaSwitchInfo 5 } ibSmaSwDefMcastPriPort OBJECT-TYPE SYNTAX Unsigned32(0..254) MAX-ACCESS read-only STATUS current DESCRIPTION "Default forwarding port for multicast packets from the other ports whose DLID does not exist in the forwarding table. If port number is unknown, a 0 is returned." Expires April 2005 [Page 16] Internet-Draft IPOVERIB SMA MIB Module October 2004 REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.4; Table 129 SwitchInfo. Also section 18.2.4.3.3 on Required Multicast Relay." ::= { ibSmaSwitchInfo 6 } ibSmaSwDefMcastNotPriPort OBJECT-TYPE SYNTAX Unsigned32(0..254) MAX-ACCESS read-only STATUS current DESCRIPTION "Forward to this port all the multicast packets from the Default Primary port whose DLID does not exist in the forwarding table. If it is unknown, a 0 is returned." REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.4; Table 129 SwitchInfo. Also section 18.2.4.3.3 on Required Multicast Relay." ::= { ibSmaSwitchInfo 7 } ibSmaSwLifeTimeValue OBJECT-TYPE SYNTAX Unsigned32(0..20) MAX-ACCESS read-only STATUS current DESCRIPTION "Reports the time a packet can live in the switch. This Lifetime Value (LV) is used as a parameter to calculate Switch Lifetime Limit (SLL) value. To calculate a valid SLL, the LV must be between 0 and 19, inclusive. If the LV value is greater than 19, the SLL is to be interpreted as infinite." REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.4; Table 129 SwitchInfo. Also section 18.2.5.4 on Transmitter Queueing." ::= { ibSmaSwitchInfo 8 } ibSmaSwPortStateChange OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object is set to true(1) whenever the PortState component makes any of the following state changes in the link finite state machine (FSM): Down --> Initialize, Initialize --> Down, Armed --> Down, or Active --> Down" REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.4; Table 129 SwitchInfo." ::= { ibSmaSwitchInfo 9 } Expires April 2005 [Page 17] Internet-Draft IPOVERIB SMA MIB Module October 2004 ibSmaSwLidsPerPort OBJECT-TYPE SYNTAX Unsigned32(0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the number of LID/Link Mask Control (LMC) combinations that may be assigned to a given external port for switches that support the Random Forwarding table." REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.4; Table 129 SwitchInfo." ::= { ibSmaSwitchInfo 10 } ibSmaSwPartitionEnforceNum OBJECT-TYPE SYNTAX Unsigned32(0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the number of entries in the partition enforcement table per physical IBA port. The 0 value indicates that partition enforcement is not supported by the switch." REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.4; Table 129 SwitchInfo." ::= { ibSmaSwitchInfo 11 } ibSmaSwInboundEnforceCap OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Flag that indicates whether the switch is capable of partition enforcement on received packets." REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.4; Table 129 SwitchInfo." ::= { ibSmaSwitchInfo 12 } ibSmaSwOutboundEnforceCap OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Flag that indicates whether the switch is capable of partition enforcement on transmitted packets." REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.4; Table 129 SwitchInfo." ::= { ibSmaSwitchInfo 13 } Expires April 2005 [Page 18] Internet-Draft IPOVERIB SMA MIB Module October 2004 ibSmaSwFilterRawPktInputCap OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Flag to indicate whether the switch is capable of raw packet enforcement on received packets." REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.4; Table 129 SwitchInfo." ::= { ibSmaSwitchInfo 14 } ibSmaSwFilterRawPktOutputCap OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Flag to indicate whether the switch is capable of raw packet enforcement on transmitted packets." REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.4; Table 129 SwitchInfo." ::= { ibSmaSwitchInfo 15 } ibSmaSwEnhancedPort0 OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Flag to indicate whether switch port 0 supports enhanced functions (TCA port). If false, switch port 0 is a base switch port 0." REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.4; Table 129 SwitchInfo." ::= { ibSmaSwitchInfo 16 } --**************************************************************** -- The GUID Info Group --**************************************************************** ibSmaGuidInfo OBJECT IDENTIFIER ::= { ibSmaObjects 3 } -- ************************************************************* -- The Global Unique Identifier (GUID) Info Group -- -- DESCRIPTION: The Global Unique Identifier Table. -- ************************************************************* ibSmaGuidInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF IbSmaGuidInfoEntry MAX-ACCESS not-accessible STATUS current Expires April 2005 [Page 19] Internet-Draft IPOVERIB SMA MIB Module October 2004 DESCRIPTION "A table containing SMA GUID information." ::= { ibSmaGuidInfo 1 } ibSmaGuidInfoEntry OBJECT-TYPE SYNTAX IbSmaGuidInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row of the ibSmaGuidInfoTable containing information about a particular GUID entry." INDEX { ibSmaGuidPortIndex, ibSmaGuidIndex } ::= { ibSmaGuidInfoTable 1 } IbSmaGuidInfoEntry ::= SEQUENCE { ibSmaGuidPortIndex IbDataPort, ibSmaGuidIndex Unsigned32, ibSmaGuidVal IbGuid } ibSmaGuidPortIndex OBJECT-TYPE SYNTAX IbDataPort MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index that identifies IB port associated with this GUID table." ::= { ibSmaGuidInfoEntry 1 } ibSmaGuidIndex OBJECT-TYPE SYNTAX Unsigned32(1..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index that identifies the GUID entry for this port. For any IB port there can be multiple 64 bit GUIDs assigned. The maximum number is implementation dependent (up to 255). If the port does not have a GUID assigned to it, the row will have 1 entry with a ibSmaGuidVal value of zeroes." ::= { ibSmaGuidInfoEntry 2 } ibSmaGuidVal OBJECT-TYPE SYNTAX IbGuid MAX-ACCESS read-only STATUS current DESCRIPTION "A Global Unique Identifier (GUID) for this port entity." REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.5; Table 130 GUIDInfo and Table 131 GUID Block Element." ::= { ibSmaGuidInfoEntry 3 } Expires April 2005 [Page 20] Internet-Draft IPOVERIB SMA MIB Module October 2004 --**************************************************************** -- The Port Info Group --**************************************************************** --**************************************************************** -- PortInfo Management Port Scalars Group -- -- DESCRIPTION: This Group contains Subnet Management Information -- about the Management Port (InfiniBand Port 0). --**************************************************************** ibSmaMgmtPortInfo OBJECT IDENTIFIER ::= { ibSmaObjects 4 } ibSmaPortMKey OBJECT-TYPE SYNTAX OCTET STRING(SIZE(8)) MAX-ACCESS read-only STATUS current DESCRIPTION "The 8-byte management key that is kept locally for the management port. If the value is 0's, no authentication is done." REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.6; Table 132 PortInfo. Also see Section 14.2.4." ::= { ibSmaMgmtPortInfo 1 } ibSmaPortGidPrefix OBJECT-TYPE SYNTAX OCTET STRING(SIZE(8)) MAX-ACCESS read-only STATUS current DESCRIPTION "GID prefix for this port." REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.6; Table 132 PortInfo." ::= { ibSmaMgmtPortInfo 2 } ibSmaPortLid OBJECT-TYPE SYNTAX Unsigned32(0..49151) MAX-ACCESS read-only STATUS current DESCRIPTION "The base LID of this port." REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.6; Table 132 PortInfo." ::= { ibSmaMgmtPortInfo 3 } ibSmaPortMasterSmLid OBJECT-TYPE SYNTAX Unsigned32(0..49151) MAX-ACCESS read-only STATUS current Expires April 2005 [Page 21] Internet-Draft IPOVERIB SMA MIB Module October 2004 DESCRIPTION "The LID of the master SM that is managing this port." REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.6; Table 132 PortInfo." ::= { ibSmaMgmtPortInfo 4 } ibSmaPortIsSubnetManager OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Capability flag for this node: Is Subnet Manager?" REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.6; Table 132 PortInfo." ::= { ibSmaMgmtPortInfo 5 } ibSmaPortIsNoticeSupported OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Capability flag for this node: Are Notices Supported?" REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.6; Table 132 PortInfo." ::= { ibSmaMgmtPortInfo 6 } ibSmaPortIsTrapSupported OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Capability flag for this node: Are IBA Traps Supported?" REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.6; Table 132 PortInfo." ::= { ibSmaMgmtPortInfo 7 } ibSmaPortIsAutoMigrateSupported OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Capability flag for this node: Is Automatic Migration Supported?" REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.6; Table 132 PortInfo." ::= { ibSmaMgmtPortInfo 8 } ibSmaPortIsSlMappingSupported OBJECT-TYPE Expires April 2005 [Page 22] Internet-Draft IPOVERIB SMA MIB Module October 2004 SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Capability flag for this node: Is SL Mapping Supported?" REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.6; Table 132 PortInfo." ::= { ibSmaMgmtPortInfo 9 } ibSmaPortIsMKeyNvram OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Capability flag for this node: Is M_Key in NVRAM?" REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.6; Table 132 PortInfo." ::= { ibSmaMgmtPortInfo 10 } ibSmaPortIsPKeyNvram OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Capability flag for this node: Is P_Key in NVRAM?" REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.6; Table 132 PortInfo." ::= { ibSmaMgmtPortInfo 11 } ibSmaPortIsLedInfoSupported OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Capability flag for this node: Is LED Information Supported?" REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.6; Table 132 PortInfo." ::= { ibSmaMgmtPortInfo 12 } ibSmaPortIsSmDisabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Capability flag for this node: Is Subnet Manager Disabled?" REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.6; Table 132 PortInfo." Expires April 2005 [Page 23] Internet-Draft IPOVERIB SMA MIB Module October 2004 ::= { ibSmaMgmtPortInfo 13 } ibSmaPortIsSysImgGuidSupported OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Capability flag for this node: Is System Image GUID Supported?" REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.6; Table 132 PortInfo." ::= { ibSmaMgmtPortInfo 14 } ibSmaPortIsPKeyExtPortTrapSup OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Capability flag for this node: Is P_Key Switch External Port Trap supported?" REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.6; Table 132 PortInfo." ::= { ibSmaMgmtPortInfo 15 } ibSmaPortIsCommManageSupported OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Capability flag for this node: Is Communication Management Supported?" REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.6; Table 132 PortInfo." ::= { ibSmaMgmtPortInfo 16 } ibSmaPortIsSnmpTunnelSupported OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Capability flag for this node: Is SNMP Tunneling Supported?" REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.6; Table 132 PortInfo." ::= { ibSmaMgmtPortInfo 17 } ibSmaPortIsReinitSupported OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current Expires April 2005 [Page 24] Internet-Draft IPOVERIB SMA MIB Module October 2004 DESCRIPTION "Capability flag for this node: Is Reinitialization Supported?" REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.6; Table 132 PortInfo." ::= { ibSmaMgmtPortInfo 18 } ibSmaPortIsDevManageSupported OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Capability flag for this node: Is Device Management Supported?" REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.6; Table 132 PortInfo." ::= { ibSmaMgmtPortInfo 19 } ibSmaPortIsVendorClassSupported OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Capability flag for this node: Is Vendor Class Supported?" REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.6; Table 132 PortInfo." ::= { ibSmaMgmtPortInfo 20 } ibSmaPortIsDrNoticeSupported OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Capability flag for this node: Is DR Notice Supported?" REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.6; Table 132 PortInfo." ::= { ibSmaMgmtPortInfo 21 } ibSmaPortIsCapMaskNoticSupported OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Capability flag for this node: Is Capability Mask Notice Supported?" REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.6; Table 132 PortInfo." ::= { ibSmaMgmtPortInfo 22 } Expires April 2005 [Page 25] Internet-Draft IPOVERIB SMA MIB Module October 2004 ibSmaPortIsBootMgmtSupported OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Capability flag for this node: Is Boot Management Supported?" REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.6; Table 132 PortInfo." ::= { ibSmaMgmtPortInfo 23 } ibSmaPortMKeyLeasePeriod OBJECT-TYPE SYNTAX Unsigned32(0..65535) UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the initial value of the lease period timer (in seconds). The lease period is the length of time that the M_Key Protection bits are to remain non-zero after a SubnSet(PortInfo) fails the M_Key authentication check. When the value is 0, the lease period shall never expire." REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.6; Table 132 PortInfo; Also Section 14.2.4.2." ::= { ibSmaMgmtPortInfo 24 } ibSmaPortMKeyProtectBits OBJECT-TYPE SYNTAX INTEGER { noMKeyProtection(1), succeedWithReturnKey(2), succeedWithReturnZeroes(3), failOnNoMatch(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Management Key (M_Key) protection bits." REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.6; Table 132 PortInfo; Also Section 14.2.4.1; Table 115 explains the Protection Levels." ::= { ibSmaMgmtPortInfo 25 } ibSmaPortMasterSmSl OBJECT-TYPE SYNTAX Unsigned32(0..15) MAX-ACCESS read-only STATUS current DESCRIPTION "The administrative Service Level of the master SM that is managing this port." REFERENCE Expires April 2005 [Page 26] Internet-Draft IPOVERIB SMA MIB Module October 2004 "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.6; Table 132 PortInfo." ::= { ibSmaMgmtPortInfo 26 } ibSmaPortInitTypeLoad OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The initialization type flags indicate the type of initialization requested by this port before SM moves it to Active or Armed state. Initialization Type flag: NoLoad. If the value is false(2), the attributes should be initialized. If the value is true(1), no data should be loaded into the attributes at all, asserting that the last-loaded data still exists and is valid." REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.6; Table 132 PortInfo." ::= { ibSmaMgmtPortInfo 27 } ibSmaPortInitTypeContent OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Initialization Type flag: PreserveContent. If the value is false(2), the port makes no request regarding the content of the data that is loaded into its attributes. If it is true(1), the port is requesting that all such data, if loaded, be set to the most recent content loaded by the SM." REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.6; Table 132 PortInfo." ::= { ibSmaMgmtPortInfo 28 } ibSmaPortInitTypePresence OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Initialization Type flag: PreservePresence. If the value is false(2), the port is requesting that all settable SA attributes referencing this port be removed prior to activating this port and Traps 64/65 be sent. If the value is true(1), the port is requesting that all such data be preserved, and that the traps not be sent." REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.6; Table 132 PortInfo." ::= { ibSmaMgmtPortInfo 29 } Expires April 2005 [Page 27] Internet-Draft IPOVERIB SMA MIB Module October 2004 ibSmaPortInitTypeResuscitate OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Initialization Type flag: DoNotResuscitate. If the value is false(2), ibSmaPortInitTypeLoad, ibSmaPortInitTypeContent, and ibSmaPortInitTypePresence ARE valid. If the value is true(1), ibSmaPortInitTypeLoad, ibSmaPortInitTypeContent, and ibSmaPortInitTypePresence ARE NOT valid. The port is requesting that reinitialization of this port and the in/out of service traps (64/65) be delayed until this flag is set to false(1)." REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.6; Table 132 PortInfo." ::= { ibSmaMgmtPortInfo 30 } ibSmaPortInitNoLoadReply OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The Init Reply flags are written by the SM prior to changing the port to Active or Armed state. Initialization Type Reply flag: NoLoadReply. If this value is false(2), the port attributes were initialized. If the value is true(1), no data was loaded into the port attributes." REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.6; Table 132 PortInfo." ::= { ibSmaMgmtPortInfo 31 } ibSmaPortInitPreserveContReply OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Initialization Type flag: PreserveContentReply. If this value is false(2), no information is available regarding the content of the data loaded into the port attributes. If the value is true(1), the data loaded into the port attributes was set to the content most recently loaded by the SM." REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.6; Table 132 PortInfo." ::= { ibSmaMgmtPortInfo 32 } ibSmaPortInitPreservePresReply OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION Expires April 2005 [Page 28] Internet-Draft IPOVERIB SMA MIB Module October 2004 "Initialization Type Reply flag: PreservePresenceReply. If this value is false(2), all settable SA attributes referencing this port were removed prior to activating this port and the in/out service traps 64 and 65 were sent. If the value is true(1), all such data existing when this port was last active was not removed and the traps 64/65 were not sent." REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.6; Table 132 PortInfo." ::= { ibSmaMgmtPortInfo 33 } ibSmaPortMKeyViolations OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counts the number of SMP packets that have been received at this port that have invalid M_Keys. This object is a latching gauge, in that whenever the maximum gauge value is encountered (i.e., the count reaches all 1's), the SMA must reset the gauge to 0, before this object begins incrementing its count again." REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.6; Table 132 PortInfo." ::= { ibSmaMgmtPortInfo 34 } ibSmaPortPKeyViolations OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counts the number of SMP packets that have been received at this port that have invalid P_Keys. This object is a latching gauge, in that whenever the maximum gauge value is encountered (i.e., the count reaches all 1's), the SMA must reset the gauge to 0, before this object begins incrementing its count again." REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.6; Table 132 PortInfo; Also Section 10.9.4." ::= { ibSmaMgmtPortInfo 35 } ibSmaPortQKeyViolations OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counts the number of SMP packets that have been received at this port that have invalid Q_Keys. This object is a latching gauge, in that whenever the maximum gauge value is encountered (i.e., the count reaches all 1's), the SMA must reset the gauge to 0, before this object begins incrementing Expires April 2005 [Page 29] Internet-Draft IPOVERIB SMA MIB Module October 2004 its count again." REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.6; Table 132 PortInfo; Also see Section 10.2.4." ::= { ibSmaMgmtPortInfo 36 } ibSmaPortNumGuid OBJECT-TYPE SYNTAX Unsigned32(0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Number of GUID entries supported in the GUIDInfo attribute for this port found in the ibSmaGuidInfoTable." REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.6; Table 132 PortInfo." ::= { ibSmaMgmtPortInfo 37 } ibSmaPortSubnetTimeout OBJECT-TYPE SYNTAX Unsigned32(0..31) MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the maximum expected subnet propagation delay, which depends upon the configuration of the switches, to reach any other port in the subnet and shall also be used to determine the maximum rate which SubnTraps() can be sent from this port by the SMA." REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.6; Table 132 PortInfo." ::= { ibSmaMgmtPortInfo 38 } ibSmaPortResponseTimeValue OBJECT-TYPE SYNTAX Unsigned32(0..31) MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the expected maximum time between the port reception of a SMP and the transmission of the associated response." REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.6; Table 132 PortInfo." ::= { ibSmaMgmtPortInfo 39 } --**************************************************************** -- PortInfo InfiniBand Data Port Group -- -- DESCRIPTION: This Group contains a table that contains the Subnet -- Management Information about each InfiniBand data port. --**************************************************************** Expires April 2005 [Page 30] Internet-Draft IPOVERIB SMA MIB Module October 2004 ibSmaDataPortInfo OBJECT IDENTIFIER ::= { ibSmaObjects 5 } ibSmaPortInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF IbSmaPortInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing SMA PortInfo information." ::= { ibSmaDataPortInfo 1 } ibSmaPortInfoEntry OBJECT-TYPE SYNTAX IbSmaPortInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row of the ibSmaPortInfoTable containing information about a particular data port and its attributes." INDEX { ibSmaPortIndex } ::= { ibSmaPortInfoTable 1 } IbSmaPortInfoEntry ::= SEQUENCE { ibSmaPortIndex IbDataPort, ibSmaPortLinkWidthEnabled INTEGER, ibSmaPortLinkWidthSupported INTEGER, ibSmaPortLinkWidthActive INTEGER, ibSmaPortLinkSpeedSupported INTEGER, ibSmaPortLinkState INTEGER, ibSmaPortPhysState INTEGER, ibSmaPortLinkDownDefaultState INTEGER, ibSmaPortLidMaskCount Unsigned32, ibSmaPortLinkSpeedActive INTEGER, ibSmaPortLinkSpeedEnabled INTEGER, ibSmaPortNeighborMtu INTEGER, ibSmaPortVirtLaneSupport INTEGER, ibSmaPortVlHighPriorityLimit Unsigned32, ibSmaPortVlArbHighCapacity Unsigned32, ibSmaPortVlArbLowCapacity Unsigned32, ibSmaPortMtuCapacity INTEGER, ibSmaPortVlStallCount Unsigned32, ibSmaPortHeadOfQueueLife Unsigned32, ibSmaPortOperationalVls INTEGER, ibSmaPortPartEnforceInbound TruthValue, ibSmaPortPartEnforceOutbound TruthValue, ibSmaPortFilterRawPktInbound TruthValue, ibSmaPortFilterRawPktOutbound TruthValue, ibSmaPortLocalPhysErrorThreshold Unsigned32, ibSmaPortOverrunErrorThreshold Unsigned32 } ibSmaPortIndex OBJECT-TYPE SYNTAX IbDataPort MAX-ACCESS not-accessible STATUS current Expires April 2005 [Page 31] Internet-Draft IPOVERIB SMA MIB Module October 2004 DESCRIPTION "Index that identifies the InfiniBand data port." ::= { ibSmaPortInfoEntry 1 } ibSmaPortLinkWidthEnabled OBJECT-TYPE SYNTAX INTEGER { oneX(1), fourX(2), oneXOr4X(3), twelveX(4), oneXOr12X(5), fourXOr12X(6), oneX4XOr12X(7), linkWidthSupported(8), other(9) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enabled link width, indicated as follows: 0: No State Change (NOP) 1: 1x 2: 4x 3: 1x or 4x 8: 12x 9: 1x or 12x 10: 4x or 12x 11: 1x, 4x or 12x 4 - 7, 12 - 254: Reserved (Ignored) 255: Set to LinkWidthSupported value." REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.6; Table 132 PortInfo." ::= { ibSmaPortInfoEntry 2 } ibSmaPortLinkWidthSupported OBJECT-TYPE SYNTAX INTEGER { oneX(1), oneXOr4X(2), oneX4XOr12X(3), other(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Supported link width for this port. This is indicated as follows by the SMA: 1: 1x 3: 1x or 4x 11: 1x, 4x or 12x 0, 2, 4-10, 12-255: Reserved." REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Expires April 2005 [Page 32] Internet-Draft IPOVERIB SMA MIB Module October 2004 Section 14.2.5.6; Table 132 PortInfo." ::= { ibSmaPortInfoEntry 3 } ibSmaPortLinkWidthActive OBJECT-TYPE SYNTAX INTEGER { oneX(1), fourX(2), twelveX(3), other(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Currently active link width on this port. This is indicated as follows by the SMA: 1: 1x 2: 4x 8: 12x 0, 3, 4-7, 9-255: Reserved." REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.6; Table 132 PortInfo." ::= { ibSmaPortInfoEntry 4 } ibSmaPortLinkSpeedSupported OBJECT-TYPE SYNTAX INTEGER { twoPoint5Gbps(1), other(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Supported link speed, indicated as follows: 1: 2.5Gbps 0, 2 - 15: reserved " REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.6; Table 132 PortInfo." ::= { ibSmaPortInfoEntry 5 } ibSmaPortLinkState OBJECT-TYPE SYNTAX INTEGER { down(1), init(2), armed(3), active(4), other(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "The state of the link on this port. 0: No state change Expires April 2005 [Page 33] Internet-Draft IPOVERIB SMA MIB Module October 2004 1: Down (includes failed links) 2: Initialize 3: Armed 4: Active 5-15: Reserved" REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.6; Table 132 PortInfo." ::= { ibSmaPortInfoEntry 6 } ibSmaPortPhysState OBJECT-TYPE SYNTAX INTEGER { sleep(1), polling(2), disabled(3), portConfigTraining(4), linkUp(5), linkErrorRecovery(6), other(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "Physical Port State. Enumerated as: 0: No state change 1: Sleep 2: Polling 3: Disabled 4: PortConfigurationTraining 5: LinkUp 6: LinkErrorRecovery 7 - 15: Reserved" REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.6; Table 132 PortInfo." ::= { ibSmaPortInfoEntry 7 } ibSmaPortLinkDownDefaultState OBJECT-TYPE SYNTAX INTEGER { sleep(1), polling(2), other(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "LinkDownDefault-State 0: No state change 1: Sleep 2: Polling 3-15: Reserved" REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Expires April 2005 [Page 34] Internet-Draft IPOVERIB SMA MIB Module October 2004 Section 14.2.5.6; Table 132 PortInfo." ::= { ibSmaPortInfoEntry 8 } ibSmaPortLidMaskCount OBJECT-TYPE SYNTAX Unsigned32(0..7) MAX-ACCESS read-only STATUS current DESCRIPTION "LID Mask Control count for multipath support for CA and router ports." REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.6; Table 132 PortInfo. Also Section 7.11.1 Multipathing Requirements on End Node." ::= { ibSmaPortInfoEntry 9 } ibSmaPortLinkSpeedActive OBJECT-TYPE SYNTAX INTEGER { twoPoint5Gbps(1), other(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Currently active link speed, indicated as follows: 1: 2.5Gbps 0, 2 - 15: reserved." REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.6; Table 132 PortInfo." ::= { ibSmaPortInfoEntry 10 } ibSmaPortLinkSpeedEnabled OBJECT-TYPE SYNTAX INTEGER { twoPoint5Gbps(1), linkSpeedSupported(2), other(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enabled link speed, indicated as follows: 0: No State Change (NOP) 1: 2.5 Gbps 2 - 14: Reserved (Ignored) 15: Set to LinkSpeedSupported value." REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.6; Table 132 PortInfo." ::= { ibSmaPortInfoEntry 11 } ibSmaPortNeighborMtu OBJECT-TYPE SYNTAX INTEGER { Expires April 2005 [Page 35] Internet-Draft IPOVERIB SMA MIB Module October 2004 mtu256(1), mtu512(2), mtu1024(3), mtu2048(4), mtu4096(5), other(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "Active maximum MTU enabled on this port for transmit: 1: 256 bytes 2: 512 bytes 3: 1024 bytes 4: 2048 bytes 5: 4096 bytes 0, 6 - 15: reserved " REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.6; Table 132 PortInfo." ::= { ibSmaPortInfoEntry 12 } ibSmaPortVirtLaneSupport OBJECT-TYPE SYNTAX INTEGER { vl0(1), vl0ToVl1(2), vl0ToVl3(3), vl0ToVl7(4), vl0ToVl14(5), other(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "Virtual Lane configuration supported on this port. Indicated as follows by the SMA: 1: VL0 2: VL0, VL1 3: VL0 - VL3 4: VL0 - VL7 5: VL0 - VL14 0, 6 - 15: reserved." REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.6; Table 132 PortInfo." ::= { ibSmaPortInfoEntry 13 } ibSmaPortVlHighPriorityLimit OBJECT-TYPE SYNTAX Unsigned32(0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Limit of High Priority component of VL Arbitration Table. Expires April 2005 [Page 36] Internet-Draft IPOVERIB SMA MIB Module October 2004 This object indicates the amount of high priority packets that can be transmitted without an opportunity to send a low priority packet. Specifically, the number of bytes that can be sent is this value times 4K bytes. A 255 value means the byte limit is unbounded and a value of 0 means that only a single packet from the high-priority table may be sent before an opportunity is given to the low-priority table." REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.6; Table 132 PortInfo; See also Section 7.6.9." ::= { ibSmaPortInfoEntry 14 } ibSmaPortVlArbHighCapacity OBJECT-TYPE SYNTAX Unsigned32(0..64) MAX-ACCESS read-only STATUS current DESCRIPTION "VL/Weight pairs supported on this port in the VLArbitration table (ibSmaHiPriVlArbTable) for high priority. Shall be 1 to 64 if more than one data VL is supported on this port, 0 otherwise." REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.6; Table 132 PortInfo; Also Section 7.6.9." ::= { ibSmaPortInfoEntry 15 } ibSmaPortVlArbLowCapacity OBJECT-TYPE SYNTAX Unsigned32(0..64) MAX-ACCESS read-only STATUS current DESCRIPTION "VL/Weight pairs supported on this port in the VLArbitration table (ibSmaLoPriVlArbTable) for low priority. Shall be N to 64 if more than one data VL is supported on this port, 0 otherwise, N being the number of data VLs supported." REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.6; Table 132 PortInfo; Also see Section 7.6.9." ::= { ibSmaPortInfoEntry 16 } ibSmaPortMtuCapacity OBJECT-TYPE SYNTAX INTEGER { mtu256(1), mtu512(2), mtu1024(3), mtu2048(4), mtu4096(5), other(6) } MAX-ACCESS read-only STATUS current DESCRIPTION Expires April 2005 [Page 37] Internet-Draft IPOVERIB SMA MIB Module October 2004 "Maximum MTU supported by this port. 1: 256 bytes 2: 512 bytes 3: 1024 bytes 4: 2048 bytes 5: 4096 bytes 0, 6 - 15: reserved " REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.6; Table 132 PortInfo." ::= { ibSmaPortInfoEntry 17 } ibSmaPortVlStallCount OBJECT-TYPE SYNTAX Unsigned32(0..7) MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the number of sequential packets dropped that causes the port to enter the VLStalled state. The result of setting this value to 0 is undefined." REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.6; Table 132 PortInfo; Section 18.2.4.4." ::= { ibSmaPortInfoEntry 18 } ibSmaPortHeadOfQueueLife OBJECT-TYPE SYNTAX Unsigned32(0..20) MAX-ACCESS read-only STATUS current DESCRIPTION "Sets the time a packet can live at the head of a Virtual Lane queue. This variable (HL) is used to compute the Head of the Queue Lifetime Limit (HLL). It is used in the formula when the HL value is between 0 and 19, inclusive. When HL is greater than 19, the HLL is to be interpreted as infinite." REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.6; Table 132 PortInfo; Also Section 18.2.5.4." ::= { ibSmaPortInfoEntry 19 } ibSmaPortOperationalVls OBJECT-TYPE SYNTAX INTEGER { vl0(1), vl0ToVl1(2), vl0ToVl3(3), vl0ToVl7(4), vl0ToVl14(5), other(6) } MAX-ACCESS read-only STATUS current DESCRIPTION Expires April 2005 [Page 38] Internet-Draft IPOVERIB SMA MIB Module October 2004 "Virtual Lanes operational on this port, indicated as follows: 0: No change 1: VL0 2: VL0 - VL1 3: VL0 - VL3 4: VL0 - VL7 5: VL0 - VL14 6 - 15: reserved" REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.6; Table 132 PortInfo." ::= { ibSmaPortInfoEntry 20 } ibSmaPortPartEnforceInbound OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates support of optional inbound partition enforcement. If true, partition enforcement on packets received on this port is enabled. If false partition enforcement on packets received from this port is disabled." REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.6; Table 132 PortInfo." ::= { ibSmaPortInfoEntry 21 } ibSmaPortPartEnforceOutbound OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates support of optional outbound partition enforcement. If true, partition enforcement on packets transmitted on this port is enabled. If false partition enforcement on packets transmitted from this port is disabled." REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.6; Table 132 PortInfo." ::= { ibSmaPortInfoEntry 22 } ibSmaPortFilterRawPktInbound OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates support of optional inbound raw packet enforcement. If true, raw packets arriving on this port are discarded. If false, raw enforcement on packets received from this port is disabled." REFERENCE Expires April 2005 [Page 39] Internet-Draft IPOVERIB SMA MIB Module October 2004 "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.6; Table 132 PortInfo." ::= { ibSmaPortInfoEntry 23 } ibSmaPortFilterRawPktOutbound OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates support of optional outbound raw packet enforcement. If true, raw packets departing on this port are discarded. If false, raw enforcement on packets leaving from this port is disabled." REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.6; Table 132 PortInfo." ::= { ibSmaPortInfoEntry 24 } ibSmaPortLocalPhysErrorThreshold OBJECT-TYPE SYNTAX Unsigned32(0..15) MAX-ACCESS read-only STATUS current DESCRIPTION "Local Physical Error threshold value. When the count of marginal link errors exceeds this threshold, the local link integrity error shall be detected." REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.6; Table 132 PortInfo; Also Section 7.12.2." ::= { ibSmaPortInfoEntry 25 } ibSmaPortOverrunErrorThreshold OBJECT-TYPE SYNTAX Unsigned32(0..15) MAX-ACCESS read-only STATUS current DESCRIPTION "Overrun error threshold value. When the count of buffer overruns over consecutive flow control update periods exceeds this threshold, the excessive buffer overrun error shall be detected." REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.6; Table 132 PortInfo; Also Section 7.12.2." ::= { ibSmaPortInfoEntry 26 } --**************************************************************** -- The Partition Key Group --**************************************************************** ibSmaPKeyInfo OBJECT IDENTIFIER ::= { ibSmaObjects 6 } Expires April 2005 [Page 40] Internet-Draft IPOVERIB SMA MIB Module October 2004 -- ************************************************************* -- The Partition Key (P_Key) Table -- -- DESCRIPTION: This table contains SMA information about the -- Partition Key Table. -- ************************************************************* ibSmaPKeyTable OBJECT-TYPE SYNTAX SEQUENCE OF IbSmaPKeyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains SMA Partition Key information for this port." ::= { ibSmaPKeyInfo 1 } ibSmaPKeyEntry OBJECT-TYPE SYNTAX IbSmaPKeyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row of the ibSmaPKeyTable containing information about the partition keys." INDEX { ibSmaPKeyIBAPortIndex, ibSmaPKeyIndex } ::= { ibSmaPKeyTable 1 } IbSmaPKeyEntry ::= SEQUENCE { ibSmaPKeyIBAPortIndex IbDataPortAndInvalid, ibSmaPKeyIndex Unsigned32, ibSmaPKeyMembership INTEGER, ibSmaPKeyBase Unsigned32 } ibSmaPKeyIBAPortIndex OBJECT-TYPE SYNTAX IbDataPortAndInvalid MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IB data port index for the switch data ports. For switch management port 0 and for CAs and routers, the index value should be 255. This indicates that the entry is not referring to a valid switch data port." ::= { ibSmaPKeyEntry 1 } ibSmaPKeyIndex OBJECT-TYPE SYNTAX Unsigned32(0..65504) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry Identifier for each Partition Key defined on a port. (The IB spec specifies 0..2047 blocks of 32 entries each for a total of 65,504 maximum Expires April 2005 [Page 41] Internet-Draft IPOVERIB SMA MIB Module October 2004 entries, although the implemented limit is defined by PartitionCap for CAs, routers, and switch port 0, and by PartitionEnforcementCap for the switch data ports)." ::= { ibSmaPKeyEntry 2 } ibSmaPKeyMembership OBJECT-TYPE SYNTAX INTEGER { none(1), limited(2), full(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "If the P_Key type is limited(2), the switch may accept a packet with a matching full P_Key, but may not accept a packet with a matching limited key. If the P_Key type is full(3), the switch can accept packets with either a full or limited P_Key. If the P_Key type is none(1), there is no associated Key Base value." REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.7; Table 134 P_KeyTable and Table 135 P_Key Block Element." ::= { ibSmaPKeyEntry 3 } ibSmaPKeyBase OBJECT-TYPE SYNTAX Unsigned32(0..65527) MAX-ACCESS read-only STATUS current DESCRIPTION "15-bit base value of the P_Key that the switch will use to check against incoming packets." REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.7; Table 134 P_KeyTable and Table 135 P_Key Block Element." ::= { ibSmaPKeyEntry 4 } --**************************************************************** -- The Service-Level-to-Virtual-Lane-Mapping Group --**************************************************************** ibSmaSlToVlMapInfo OBJECT IDENTIFIER ::= { ibSmaObjects 7 } -- ************************************************************* -- The Service Level to Virtual Lane Configuration Mapping Table -- -- DESCRIPTION: This table reflects the current Service Level -- value for the input port/output port/virtual lane. -- ************************************************************* ibSmaSL2VLMapTable OBJECT-TYPE Expires April 2005 [Page 42] Internet-Draft IPOVERIB SMA MIB Module October 2004 SYNTAX SEQUENCE OF IbSmaSL2VLMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides the virtual lane value for the output port/input port/service level mapping. Each output port contains a VL mapping for the next hop based on the input port the packet arrived on and its SL value." ::= { ibSmaSlToVlMapInfo 1 } ibSmaSL2VLMapEntry OBJECT-TYPE SYNTAX IbSmaSL2VLMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Column definitions for the VL from output/input/SL entry." INDEX { ibSmaIBAOutPortIndex, ibSmaIBAInPortIndex, ibSmaServiceLevelIndex } ::= { ibSmaSL2VLMapTable 1 } IbSmaSL2VLMapEntry ::= SEQUENCE { ibSmaIBAOutPortIndex IbDataPortAndInvalid, ibSmaIBAInPortIndex IbDataPortAndInvalid, ibSmaServiceLevelIndex Unsigned32, ibSmaVirtualLane Unsigned32 } ibSmaIBAOutPortIndex OBJECT-TYPE SYNTAX IbDataPortAndInvalid MAX-ACCESS not-accessible STATUS current DESCRIPTION "The egress port index for the service level mapping. A value of 255 indicates the switch management port 0." ::= { ibSmaSL2VLMapEntry 1 } ibSmaIBAInPortIndex OBJECT-TYPE SYNTAX IbDataPortAndInvalid MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ingress port index for the service level mapping. A value of 255 indicates the switch management port 0." ::= { ibSmaSL2VLMapEntry 2 } ibSmaServiceLevelIndex OBJECT-TYPE SYNTAX Unsigned32(0..15) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Service Level value index for this mapping." ::= { ibSmaSL2VLMapEntry 3 } Expires April 2005 [Page 43] Internet-Draft IPOVERIB SMA MIB Module October 2004 ibSmaVirtualLane OBJECT-TYPE SYNTAX Unsigned32(0..15) MAX-ACCESS read-only STATUS current DESCRIPTION "The outgoing packet's Virtual Lane value for this Service Level Mapping." REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.8.; Table 136 SLtoVLMappingTable." ::= { ibSmaSL2VLMapEntry 4 } --**************************************************************** -- The Virtual Lane Arbitration Group --**************************************************************** ibSmaVLArbitInfo OBJECT IDENTIFIER ::= { ibSmaObjects 8 } -- ************************************************************* -- The Virtual Lane High Priority Arbitration Table -- -- DESCRIPTION: This table contains the VL High Priority -- Arbitration Table. The second index is the list index -- that allows for the viewing of the configuration of the -- VL/weight pairs configured by the SM. -- ************************************************************* ibSmaHiPriVlArbTable OBJECT-TYPE SYNTAX SEQUENCE OF IbSmaHiPriVlArbEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides visibility into the High Priority Arbitration process for configuring VL/Weight pairs for the IB data ports." ::= { ibSmaVLArbitInfo 1 } ibSmaHiPriVlArbEntry OBJECT-TYPE SYNTAX IbSmaHiPriVlArbEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Column definitions for High Priority Arbitration Table." INDEX { ibSmaHiPriIBAPortIndex, ibSmaHiPriNIndex } ::= { ibSmaHiPriVlArbTable 1 } IbSmaHiPriVlArbEntry ::= SEQUENCE { ibSmaHiPriIBAPortIndex IbDataPort, ibSmaHiPriNIndex Unsigned32, ibSmaHiPriVirtLane Unsigned32, ibSmaHiPriWeight Unsigned32 } Expires April 2005 [Page 44] Internet-Draft IPOVERIB SMA MIB Module October 2004 ibSmaHiPriIBAPortIndex OBJECT-TYPE SYNTAX IbDataPort MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index for the configured IBA port." ::= { ibSmaHiPriVlArbEntry 1 } ibSmaHiPriNIndex OBJECT-TYPE SYNTAX Unsigned32(1..64) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The High Priority list index." ::= { ibSmaHiPriVlArbEntry 2 } ibSmaHiPriVirtLane OBJECT-TYPE SYNTAX Unsigned32(0..14) MAX-ACCESS read-only STATUS current DESCRIPTION "The virtual lane this entry applies to." ::= { ibSmaHiPriVlArbEntry 3 } ibSmaHiPriWeight OBJECT-TYPE SYNTAX Unsigned32(0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Number of 64-byte units that may be transmitted from this VL when its turn in the arbitration process occurs. A weight of 0 indicates that the entry should be skipped." REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.9; Table 137 VLArbitrationTable." ::= { ibSmaHiPriVlArbEntry 4 } -- ************************************************************* -- The Virtual Lane Low Priority Arbitration Table -- -- DESCRIPTION: This table contains the VL Low Priority Arbitration -- Table. The second index is the list index that allows for the -- viewing of the configuration of the VL/weight pairs done by SM. -- ************************************************************* ibSmaLowPriVlArbTable OBJECT-TYPE SYNTAX SEQUENCE OF IbSmaLowPriVlArbEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides visibility into the Low Priority Arbitration process." ::= { ibSmaVLArbitInfo 2 } Expires April 2005 [Page 45] Internet-Draft IPOVERIB SMA MIB Module October 2004 ibSmaLowPriVlArbEntry OBJECT-TYPE SYNTAX IbSmaLowPriVlArbEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Column definitions for Low Priority Arbitration Table." INDEX { ibSmaLowPriIBAPortIndex, ibSmaLowPriNIndex } ::= { ibSmaLowPriVlArbTable 1 } IbSmaLowPriVlArbEntry ::= SEQUENCE { ibSmaLowPriIBAPortIndex IbDataPort, ibSmaLowPriNIndex Unsigned32, ibSmaLowPriVirtLane Unsigned32, ibSmaLowPriWeight Unsigned32 } ibSmaLowPriIBAPortIndex OBJECT-TYPE SYNTAX IbDataPort MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index for the configured IB data port." ::= { ibSmaLowPriVlArbEntry 1 } ibSmaLowPriNIndex OBJECT-TYPE SYNTAX Unsigned32(1..64) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Low Priority list index." ::= { ibSmaLowPriVlArbEntry 2 } ibSmaLowPriVirtLane OBJECT-TYPE SYNTAX Unsigned32(0..14) MAX-ACCESS read-only STATUS current DESCRIPTION "The Virtual Lane this entry applies to." ::= { ibSmaLowPriVlArbEntry 3 } ibSmaLowPriWeight OBJECT-TYPE SYNTAX Unsigned32(0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Number of 64-byte units that may be transmitted from this VL when its turn in the arbitration process occurs. A weight of 0 indicates that the entry should be skipped." REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.9; Table 137 VLArbitrationTable." ::= { ibSmaLowPriVlArbEntry 4 } Expires April 2005 [Page 46] Internet-Draft IPOVERIB SMA MIB Module October 2004 --**************************************************************** -- The Linear Forwarding Group --**************************************************************** ibSmaLFTInfo OBJECT IDENTIFIER ::= { ibSmaObjects 9 } --**************************************************************** -- Linear Forwarding Table Group: ibSmaLinForTable -- -- DESCRIPTION: This table contains information about the Linear -- Forwarding Table. --**************************************************************** ibSmaLinForTable OBJECT-TYPE SYNTAX SEQUENCE OF IbSmaLinForEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing information about the Linear Forwarding Table." ::= { ibSmaLFTInfo 1 } ibSmaLinForEntry OBJECT-TYPE SYNTAX IbSmaLinForEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Current unicast forwarding Table entry configured by the Subnet Manager based on destination LID." INDEX { ibSmaLinDestDLIDIndex } ::= { ibSmaLinForTable 1 } IbSmaLinForEntry ::= SEQUENCE { ibSmaLinDestDLIDIndex IbUnicastLid, ibSmaLinForwEgressPort IbDataPortAndInvalid } ibSmaLinDestDLIDIndex OBJECT-TYPE SYNTAX IbUnicastLid MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index that identifies Destination Local Identifier (DLID) that the forwarding entry refers to in the Linear Forwarding Table." REFERENCE "InfiniBand Architecture Release 1.1 Vol. 1. Section 14.2.5.10 LinearForwardingTable; Table 139 and Table 140." ::= { ibSmaLinForEntry 1 } ibSmaLinForwEgressPort OBJECT-TYPE SYNTAX IbDataPortAndInvalid MAX-ACCESS read-only Expires April 2005 [Page 47] Internet-Draft IPOVERIB SMA MIB Module October 2004 STATUS current DESCRIPTION "The port to which packets with the LID corresponding to this entry are to be forwarded." REFERENCE "InfiniBand Architecture Release 1.1 Vol. 1. Section 14.2.5.10 LinearForwardingTable; Table 139 and Table 140." ::= { ibSmaLinForEntry 2 } --**************************************************************** -- The Random Forwarding Group --**************************************************************** ibSmaRFTInfo OBJECT IDENTIFIER ::= { ibSmaObjects 10 } --**************************************************************** -- Random Forwarding Table -- -- DESCRIPTION: This Table contains Subnet Management Information -- about the Random Forwarding Table. --**************************************************************** ibSmaRandomForwardingTable OBJECT-TYPE SYNTAX SEQUENCE OF IbSmaRandomForwardingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing SMA Random Forwarding information." ::= { ibSmaRFTInfo 1 } ibSmaRandomForwardingEntry OBJECT-TYPE SYNTAX IbSmaRandomForwardingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row of the ibSmaRandomForwardingTable containing information about the Random Forwarding Table." INDEX { ibSmaRandomForwardingPortIndex } ::= { ibSmaRandomForwardingTable 1 } IbSmaRandomForwardingEntry ::= SEQUENCE { ibSmaRandomForwardingPortIndex IbDataPort, ibSmaRandomDestLID Unsigned32, ibSmaRandomForwEgressPort IbDataPort, ibSmaRandomLMC Unsigned32, ibSmaRandomIsValid TruthValue } ibSmaRandomForwardingPortIndex OBJECT-TYPE SYNTAX IbDataPort MAX-ACCESS not-accessible STATUS current DESCRIPTION Expires April 2005 [Page 48] Internet-Draft IPOVERIB SMA MIB Module October 2004 "The port index value." ::= { ibSmaRandomForwardingEntry 1 } ibSmaRandomDestLID OBJECT-TYPE SYNTAX Unsigned32(1..49152) MAX-ACCESS read-only STATUS current DESCRIPTION "Identifies Destination Local Identifier (DLID) that the forwarding entry refers to." REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.11 RandomForwardingTable; Table 141 and Table 142." ::= { ibSmaRandomForwardingEntry 2 } ibSmaRandomForwEgressPort OBJECT-TYPE SYNTAX IbDataPort MAX-ACCESS read-only STATUS current DESCRIPTION "The port to which packets with the LID corresponding to this entry are to be forwarded." REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.11 RandomForwardingTable; Table 141 and Table 142." ::= { ibSmaRandomForwardingEntry 3 } ibSmaRandomLMC OBJECT-TYPE SYNTAX Unsigned32(0..7) MAX-ACCESS read-only STATUS current DESCRIPTION "The LID Mask Control (LMC) of this LID. The LMC specifies the number of Path Bits in the Local Identifier." REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.11 RandomForwardingTable; Table 141 and Table 142." ::= { ibSmaRandomForwardingEntry 4 } ibSmaRandomIsValid OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "If true, this LID/Port pair is valid. Note that when the SMA sets this parameter to false(2), entries can be removed." REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.11 RandomForwardingTable; Table 141 and Table 142." Expires April 2005 [Page 49] Internet-Draft IPOVERIB SMA MIB Module October 2004 ::= { ibSmaRandomForwardingEntry 5 } --**************************************************************** -- The Multicast Forwarding Group --**************************************************************** ibSmaMFTInfo OBJECT IDENTIFIER ::= { ibSmaObjects 11 } --**************************************************************** -- Multicast Forwarding Table Group: ibMulForTable -- -- DESCRIPTION: This table contains information about the Multicast -- Forwarding Table. --**************************************************************** ibSmaMulForTable OBJECT-TYPE SYNTAX SEQUENCE OF IbSmaMulForEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing information about the Multicast Forwarding Table." ::= { ibSmaMFTInfo 1 } ibSmaMulForEntry OBJECT-TYPE SYNTAX IbSmaMulForEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Current multicast forwarding table entry as configured by the Subnet Manager based on destination LID." INDEX { ibSmaMulDestDLIDIndex } ::= { ibSmaMulForTable 1 } IbSmaMulForEntry ::= SEQUENCE { ibSmaMulDestDLIDIndex IbMulticastLid, ibSmaMulForwMask IbSmPortList } ibSmaMulDestDLIDIndex OBJECT-TYPE SYNTAX IbMulticastLid MAX-ACCESS not-accessible STATUS current DESCRIPTION "Identifies Destination Local Identifier (DLID) that the forwarding entry refers to in the Multicast Forwarding Table." ::= { ibSmaMulForEntry 1 } ibSmaMulForwMask OBJECT-TYPE SYNTAX IbSmPortList MAX-ACCESS read-only STATUS current DESCRIPTION "A 256-bit mask that represents the port list. An incoming Expires April 2005 [Page 50] Internet-Draft IPOVERIB SMA MIB Module October 2004 packet with this LID table entry will be forwarded to all ports for which the bit in the port mask is set to 1." REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.12 MulticastForwardingTable; Table 143 and Table 144." ::= { ibSmaMulForEntry 2 } --**************************************************************** -- The Subnet Manager Info Group --**************************************************************** ibSmaSMInfo OBJECT IDENTIFIER ::= { ibSmaObjects 12 } --**************************************************************** -- Subnet Manager Information Table Group --**************************************************************** ibSmaSubMgrInfo OBJECT IDENTIFIER ::= { ibSmaSMInfo 1 } --**************************************************************** -- Subnet Manager Information Table -- -- DESCRIPTION: This Table contains Subnet Management Information -- about the Subnet Managers on this subnet. This information -- is available on a port where a Subnet Manager resides. -- This information is used by SMs to exchange information -- during subnet discovery and polling. --**************************************************************** ibSmaSmInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF IbSmaSmInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing SMA Subnet Manager information." ::= { ibSmaSubMgrInfo 1 } ibSmaSmInfoEntry OBJECT-TYPE SYNTAX IbSmaSmInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row of the ibSmaSmInfoTable containing information about the Subnet Manager Table." INDEX { ibSmaSmInfoPortIndex } ::= { ibSmaSmInfoTable 1 } IbSmaSmInfoEntry ::= SEQUENCE { ibSmaSmInfoPortIndex IbDataPort, ibSmaSmGuid IbGuid, ibSmaSmSmKey OCTET STRING, ibSmaSmSmpCount Counter32, ibSmaSmPriority Unsigned32, ibSmaSmState INTEGER Expires April 2005 [Page 51] Internet-Draft IPOVERIB SMA MIB Module October 2004 } ibSmaSmInfoPortIndex OBJECT-TYPE SYNTAX IbDataPort MAX-ACCESS not-accessible STATUS current DESCRIPTION "The port index value." ::= { ibSmaSmInfoEntry 1 } ibSmaSmGuid OBJECT-TYPE SYNTAX IbGuid MAX-ACCESS read-only STATUS current DESCRIPTION "The Port GUID of the port where the SM resides." REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.13; Table 145 SMInfo Table." ::= { ibSmaSmInfoEntry 2 } ibSmaSmSmKey OBJECT-TYPE SYNTAX OCTET STRING (SIZE(8)) MAX-ACCESS read-only STATUS current DESCRIPTION "Key for this SM. This is shown as zeroes unless the requesting SM is proven to be the master, or the requester is otherwise authenticated." REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.13; Table 145 SMInfo Table." ::= { ibSmaSmInfoEntry 3 } ibSmaSmSmpCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counter that increments each time the SM issues an SMP or performs other management activities. This counter is used as a heartbeat indicator by standby SMs." REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.13; Table 145 SMInfo Table." ::= { ibSmaSmInfoEntry 4 } ibSmaSmPriority OBJECT-TYPE SYNTAX Unsigned32(0..15) MAX-ACCESS read-only STATUS current DESCRIPTION "Administratively assigned priority for this SM. This Expires April 2005 [Page 52] Internet-Draft IPOVERIB SMA MIB Module October 2004 can be reset by master SM. 0 is the lowest priority. An out-of-band mechanism shall be provided to set this value. The default value SHALL be 0." REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.13; Table 145 SMInfo Table." ::= { ibSmaSmInfoEntry 5 } ibSmaSmState OBJECT-TYPE SYNTAX INTEGER { notActive(1), discovering(2), standby(3), master(4), unknown(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enumerated value indicating this SM's state. The InfiniBand enumeration values are: 0 - not active 1 - discovering 2 - standby 3 - master 4-15 - reserved. Note: a value of reserved returns unknown(5)." REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.13; Table 145 SMInfo Table." ::= { ibSmaSmInfoEntry 6 } --**************************************************************** -- The Vendor Diagnostics Group --**************************************************************** ibSmaVendDiagInfo OBJECT IDENTIFIER ::= { ibSmaObjects 13 } --**************************************************************** -- Vendor Diagnostics Information Table -- -- DESCRIPTION: This Table contains Subnet Management Information -- about the Vendor Diagnostics. --**************************************************************** ibSmaVendDiagInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF IbSmaVendDiagInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing SMA Vendor Diagnostic Info information." ::= { ibSmaVendDiagInfo 1 } Expires April 2005 [Page 53] Internet-Draft IPOVERIB SMA MIB Module October 2004 ibSmaVendDiagInfoEntry OBJECT-TYPE SYNTAX IbSmaVendDiagInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row of the ibSmaVendDiagInfoTable containing information about a particular data port's diagnostic status." INDEX { ibSmaVendDiagPortIndex } ::= { ibSmaVendDiagInfoTable 1 } IbSmaVendDiagInfoEntry ::= SEQUENCE { ibSmaVendDiagPortIndex IbDataPortAndInvalid, ibSmaPortGenericDiagCode INTEGER, ibSmaPortVendorDiagCode Unsigned32, ibSmaPortVendorDiagIndexFwd TruthValue, ibSmaPortVendorDiagData OCTET STRING } ibSmaVendDiagPortIndex OBJECT-TYPE SYNTAX IbDataPortAndInvalid MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index that identifies the port for the diagnostics. If the index value is 255, information about the management port is returned." ::= { ibSmaVendDiagInfoEntry 1 } ibSmaPortGenericDiagCode OBJECT-TYPE SYNTAX INTEGER { portReady(1), performingSelfTest(2), initializing(3), softError(4), hardError(5), other(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "The generic portion of the Port Info Diagnostic code." REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.6; Table 132 PortInfo. Also see Section 14.2.5.6.1; Table 133: Standard Encoding of DiagCode Bits 3-0." ::= { ibSmaVendDiagInfoEntry 2 } ibSmaPortVendorDiagCode OBJECT-TYPE SYNTAX Unsigned32(0..2047) MAX-ACCESS read-only STATUS current Expires April 2005 [Page 54] Internet-Draft IPOVERIB SMA MIB Module October 2004 DESCRIPTION "The vendor specific portion of the Port Info Diagnostic code." REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.6; Table 132 PortInfo. Also see Section 14.2.5.6.1 and Figure 188." ::= { ibSmaVendDiagInfoEntry 3 } ibSmaPortVendorDiagIndexFwd OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Flag to control ibSmaPortVendorDiagData data buffer. If this boolean is true(1), the data buffer contains meaningful vendor-supplied additional diagnostic information. If this object is false(2), the buffer is empty." REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.14 and Table 146 VendorDiag." ::= { ibSmaVendDiagInfoEntry 4 } ibSmaPortVendorDiagData OBJECT-TYPE SYNTAX OCTET STRING (SIZE(124)) MAX-ACCESS read-only STATUS current DESCRIPTION "Data buffer that can contain additional vendor-specific diagnostic information. The ibSmaPortVendorDiagIndexFwd flag controls whether this object contains meaningful data. Note: in IB, this buffer comprises n number of 62 byte buffers. This object defines a buffer that can hold up to 2 of these IB chained buffers." REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.6; Table 132 PortInfo. Also see Section 14.2.5.6.1 and Figure 188." ::= { ibSmaVendDiagInfoEntry 5 } --**************************************************************** -- The LED Info Group --**************************************************************** ibSmaLedInfo OBJECT IDENTIFIER ::= { ibSmaObjects 14 } --**************************************************************** -- LED Information Table -- -- DESCRIPTION: This Table contains Subnet Management Information -- about the LEDs. Note that a CA, router, or switch indicates -- support for this attribute in the PortInfo::CapabilityMask -- object. --**************************************************************** Expires April 2005 [Page 55] Internet-Draft IPOVERIB SMA MIB Module October 2004 ibSmaLedInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF IbSmaLedInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing SMA LED Info information." ::= { ibSmaLedInfo 1 } ibSmaLedInfoEntry OBJECT-TYPE SYNTAX IbSmaLedInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row of the ibSmaLedInfoTable containing information about a particular data port's LED status." INDEX { ibSmaLedIndex } ::= { ibSmaLedInfoTable 1 } IbSmaLedInfoEntry ::= SEQUENCE { ibSmaLedIndex IbDataPort, ibSmaLedState INTEGER } ibSmaLedIndex OBJECT-TYPE SYNTAX IbDataPort MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index that identifies the IB data port with its LED." ::= { ibSmaLedInfoEntry 1 } ibSmaLedState OBJECT-TYPE SYNTAX INTEGER { unknown(1), on(2), off(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "State of the LED." REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.15 LedInfo; Table 147 LedInfo Table." ::= { ibSmaLedInfoEntry 2 } --**************************************************************** -- Notifications Group --**************************************************************** ibSmaNotificationPrefix OBJECT IDENTIFIER ::= { ibSmaNotifications 0 } Expires April 2005 [Page 56] Internet-Draft IPOVERIB SMA MIB Module October 2004 --**************************************************************** -- Notifications -- -- DESCRIPTION: The Notifications Group contains the set of SMA -- Traps that will be translated into SNMP notifications and -- sent to the registered NMS managers. --**************************************************************** ibSmaPortLinkStateChange NOTIFICATION-TYPE OBJECTS { ibSmaNodeLid } STATUS current DESCRIPTION "This notification translates InfiniBand SMA Trap 128: Link State of at least one port of switch at has changed." REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.1; Table 118 and 120." ::= { ibSmaNotificationPrefix 1 } ibSmaLinkIntegrityThresReached NOTIFICATION-TYPE OBJECTS { ibSmaNodeLid, ibSmaNodePortNum } STATUS current DESCRIPTION "This notification translates InfiniBand SMA Trap 129: Local Link Integrity threshold reached at ." REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.1; Table 118 and 121." ::= { ibSmaNotificationPrefix 2 } ibSmaExcessBuffOverrunThres NOTIFICATION-TYPE OBJECTS { ibSmaNodeLid, ibSmaNodePortNum } STATUS current DESCRIPTION "This notification translates InfiniBand SMA Trap 130: Excessive Buffer Overrun threshold reached at ." REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.1; Table 118 and 121." ::= { ibSmaNotificationPrefix 3 } Expires April 2005 [Page 57] Internet-Draft IPOVERIB SMA MIB Module October 2004 ibSmaFlowCntrlUpdateTimerExpire NOTIFICATION-TYPE OBJECTS { ibSmaNodeLid, ibSmaNodePortNum } STATUS current DESCRIPTION "This notification translates InfiniBand SMA Trap 131: Switch Flow Control Update watchdog timer expired at ." REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.1; Table 118 and 121." ::= { ibSmaNotificationPrefix 4 } ibSmaCapabilityMaskModified NOTIFICATION-TYPE OBJECTS { ibSmaNodeLid, ibSmaNodeCapMask } STATUS current DESCRIPTION "This notification translates InfiniBand SMA Trap 144: The capability mask at has been modified to ." REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.1; Table 118 and 122." ::= { ibSmaNotificationPrefix 5 } ibSmaSysImageGuidModified NOTIFICATION-TYPE OBJECTS { ibSmaNodeLid, ibSmaSystemImageGuid } STATUS current DESCRIPTION "This notification translates InfiniBand SMA Trap 145: The System Image GUID at has been modified to ." REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.1; Table 118 and 123." ::= { ibSmaNotificationPrefix 6 } ibSmaBadManagementKey NOTIFICATION-TYPE OBJECTS { ibSmaNodeKey, ibSmaNodeLid, Expires April 2005 [Page 58] Internet-Draft IPOVERIB SMA MIB Module October 2004 ibSmaNodeMethod, ibSmaNodeAttributeId, ibSmaNodeAttributeModifier } STATUS current DESCRIPTION "This notification translates InfiniBand SMA Trap 256: Bad M_Key, from attempted with and ." REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.1; Table 118 and 124." ::= { ibSmaNotificationPrefix 7 } ibSmaBadPartitionKey NOTIFICATION-TYPE OBJECTS { ibSmaNodeKey, ibSmaNodeLid, ibSmaNodeGid1, ibSmaNodeQueuePair1, ibSmaNodeLid2, ibSmaNodeGid2, ibSmaNodeQueuePair2, ibSmaNodeServiceLevel } STATUS current DESCRIPTION "This notification translates InfiniBand SMA Trap 257: Bad P_Key, from // to // on ." REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.1; Table 118 and 125." ::= { ibSmaNotificationPrefix 8 } ibSmaBadQueueKey NOTIFICATION-TYPE OBJECTS { ibSmaNodeKey, ibSmaNodeLid, ibSmaNodeGid1, ibSmaNodeQueuePair1, ibSmaNodeLid2, ibSmaNodeGid2, ibSmaNodeQueuePair2, ibSmaNodeServiceLevel } STATUS current DESCRIPTION "This notification translates InfiniBand SMA Trap 258: Bad Q_Key, from // to // on ." Expires April 2005 [Page 59] Internet-Draft IPOVERIB SMA MIB Module October 2004 REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.1; Table 118 and 125." ::= { ibSmaNotificationPrefix 9 } ibSmaBadPKeyAtSwitchPort NOTIFICATION-TYPE OBJECTS { ibSmaNodeKey, ibSmaNodeLid, ibSmaNodeGid1, ibSmaNodeQueuePair1, ibSmaNodeLid2, ibSmaNodeGid2, ibSmaNodeQueuePair2, ibSmaNodeServiceLevel, ibSmaNodeSwitchLid, ibSmaNodeDataValid } STATUS current DESCRIPTION "This notification translates InfiniBand SMA Trap 259: Bad P_Key, from // to // on at switch external port , where the validity of the fields is indicated by ." REFERENCE "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.1; Table 118 and 126." ::= { ibSmaNotificationPrefix 10 } --**************************************************************** -- Module Conformance Statement -- -- DESCRIPTION: The module conformance statement includes the -- compliance statements and the units of conformance -- section. --**************************************************************** ibSmaCompliances OBJECT IDENTIFIER ::= { ibSmaConformance 1 } ibSmaGroups OBJECT IDENTIFIER ::= { ibSmaConformance 2 } --**************************************************************** -- Compliance Statements --**************************************************************** ibSmaBasicNodeCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The basic node implementation requirements for agents that support the IPOIB SMA MIB." MODULE -- this module MANDATORY-GROUPS { Expires April 2005 [Page 60] Internet-Draft IPOVERIB SMA MIB Module October 2004 ibSmaNodeGroup } ::= { ibSmaCompliances 1 } ibSmaFullSwitchCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The full node implementation requirements for agents that support the IPOIB SMA MIB for InfiniBand switches." MODULE -- this module MANDATORY-GROUPS { ibSmaNodeGroup, ibSmaSwitchGroup, ibSmaGuidGroup, ibSmaMgmtPortGroup, ibSmaDataPortGroup, ibSmaPKeyGroup, ibSmaSlToVlMapGroup, ibSmaVLArbitGroup, ibSmaLFTGroup, ibSmaRFTGroup, ibSmaMFTGroup, ibSmaSMGroup, ibSmaVendDiagGroup, ibSmaLedGroup, ibSmaNotificationsGroup } ::= { ibSmaCompliances 2 } ibSmaFullRouterCACompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The full node implementation requirements for agents that support the IPOIB SMA MIB for InfiniBand CAs and routers." MODULE -- this module MANDATORY-GROUPS { ibSmaNodeGroup, ibSmaGuidGroup, ibSmaMgmtPortGroup, ibSmaDataPortGroup, ibSmaPKeyGroup, ibSmaSlToVlMapGroup, ibSmaVLArbitGroup, ibSmaSMGroup, ibSmaVendDiagGroup, ibSmaLedGroup, ibSmaNotificationsGroup } ::= { ibSmaCompliances 3 } --**************************************************************** -- Units Of Conformance --**************************************************************** Expires April 2005 [Page 61] Internet-Draft IPOVERIB SMA MIB Module October 2004 ibSmaNodeGroup OBJECT-GROUP OBJECTS { ibSmaNodeString, ibSmaNodeBaseVersion, ibSmaNodeClassVersion, ibSmaNodeType, ibSmaNodeNumPorts, ibSmaSystemImageGuid, ibSmaNodeGuid, ibSmaNodePortGuid, ibSmaNodePartitionTableNum, ibSmaNodeDeviceId, ibSmaNodeRevision, ibSmaNodeLocalPortNumOrZero, ibSmaNodeVendorId, ibSmaNodeLid, ibSmaNodePortNum, ibSmaNodeMethod, ibSmaNodeAttributeId, ibSmaNodeAttributeModifier, ibSmaNodeKey, ibSmaNodeLid2, ibSmaNodeServiceLevel, ibSmaNodeQueuePair1, ibSmaNodeQueuePair2, ibSmaNodeGid1, ibSmaNodeGid2, ibSmaNodeCapMask, ibSmaNodeSwitchLid, ibSmaNodeDataValid } STATUS current DESCRIPTION "The ibSmaNodeGroup defines the MIB objects that describe this InfiniBand subnet node." ::= { ibSmaGroups 1 } ibSmaSwitchGroup OBJECT-GROUP OBJECTS { ibSmaSwLinearFdbTableNum, ibSmaSwRandomFdbTableNum, ibSmaSwMulticastFdbTableNum, ibSmaSwLinearFdbTop, ibSmaSwDefaultPort, ibSmaSwDefMcastPriPort, ibSmaSwDefMcastNotPriPort, ibSmaSwLifeTimeValue, ibSmaSwPortStateChange, ibSmaSwLidsPerPort, ibSmaSwPartitionEnforceNum, ibSmaSwInboundEnforceCap, ibSmaSwOutboundEnforceCap, ibSmaSwFilterRawPktInputCap, Expires April 2005 [Page 62] Internet-Draft IPOVERIB SMA MIB Module October 2004 ibSmaSwFilterRawPktOutputCap, ibSmaSwEnhancedPort0 } STATUS current DESCRIPTION "The ibSmaSwitchGroup defines the MIB objects that describe this InfiniBand switch." ::= { ibSmaGroups 2 } ibSmaGuidGroup OBJECT-GROUP OBJECTS { ibSmaGuidVal } STATUS current DESCRIPTION "The ibSmaGuidGroup defines the MIB object that describes the GUIDs associated with this node." ::= { ibSmaGroups 3 } ibSmaMgmtPortGroup OBJECT-GROUP OBJECTS { ibSmaPortMKey, ibSmaPortGidPrefix, ibSmaPortLid, ibSmaPortMasterSmLid, ibSmaPortIsSubnetManager, ibSmaPortIsNoticeSupported, ibSmaPortIsTrapSupported, ibSmaPortIsAutoMigrateSupported, ibSmaPortIsSlMappingSupported, ibSmaPortIsMKeyNvram, ibSmaPortIsPKeyNvram, ibSmaPortIsLedInfoSupported, ibSmaPortIsSmDisabled, ibSmaPortIsSysImgGuidSupported, ibSmaPortIsPKeyExtPortTrapSup, ibSmaPortIsCommManageSupported, ibSmaPortIsSnmpTunnelSupported, ibSmaPortIsReinitSupported, ibSmaPortIsDevManageSupported, ibSmaPortIsVendorClassSupported, ibSmaPortIsDrNoticeSupported, ibSmaPortIsCapMaskNoticSupported, ibSmaPortIsBootMgmtSupported, ibSmaPortMKeyLeasePeriod, ibSmaPortMKeyProtectBits, ibSmaPortMasterSmSl, ibSmaPortInitTypeLoad, ibSmaPortInitTypeContent, ibSmaPortInitTypePresence, ibSmaPortInitTypeResuscitate, ibSmaPortInitNoLoadReply, ibSmaPortInitPreserveContReply, Expires April 2005 [Page 63] Internet-Draft IPOVERIB SMA MIB Module October 2004 ibSmaPortInitPreservePresReply, ibSmaPortMKeyViolations, ibSmaPortPKeyViolations, ibSmaPortQKeyViolations, ibSmaPortNumGuid, ibSmaPortSubnetTimeout, ibSmaPortResponseTimeValue } STATUS current DESCRIPTION "The ibSmaMgmtPortGroup defines the MIB objects that describe the management port." ::= { ibSmaGroups 4 } ibSmaDataPortGroup OBJECT-GROUP OBJECTS { ibSmaPortLinkWidthEnabled, ibSmaPortLinkWidthSupported, ibSmaPortLinkWidthActive, ibSmaPortLinkSpeedSupported, ibSmaPortLinkState, ibSmaPortPhysState, ibSmaPortLinkDownDefaultState, ibSmaPortLidMaskCount, ibSmaPortLinkSpeedActive, ibSmaPortLinkSpeedEnabled, ibSmaPortNeighborMtu, ibSmaPortVirtLaneSupport, ibSmaPortVlHighPriorityLimit, ibSmaPortVlArbHighCapacity, ibSmaPortVlArbLowCapacity, ibSmaPortMtuCapacity, ibSmaPortVlStallCount, ibSmaPortHeadOfQueueLife, ibSmaPortOperationalVls, ibSmaPortPartEnforceInbound, ibSmaPortPartEnforceOutbound, ibSmaPortFilterRawPktInbound, ibSmaPortFilterRawPktOutbound, ibSmaPortLocalPhysErrorThreshold, ibSmaPortOverrunErrorThreshold } STATUS current DESCRIPTION "The ibSmaDataPortGroup defines MIB objects for IB data ports." ::= { ibSmaGroups 5 } ibSmaPKeyGroup OBJECT-GROUP OBJECTS { ibSmaPKeyMembership, ibSmaPKeyBase } STATUS current Expires April 2005 [Page 64] Internet-Draft IPOVERIB SMA MIB Module October 2004 DESCRIPTION "The ibSmaPKeyGroup defines the MIB objects that describe the Partition Keys." ::= { ibSmaGroups 6 } ibSmaSlToVlMapGroup OBJECT-GROUP OBJECTS { ibSmaVirtualLane } STATUS current DESCRIPTION "The ibSmaSlToVlMapGroup defines the MIB objects that describe the Service Level to Virtual Lane mapping." ::= { ibSmaGroups 7 } ibSmaVLArbitGroup OBJECT-GROUP OBJECTS { ibSmaHiPriVirtLane, ibSmaHiPriWeight, ibSmaLowPriVirtLane, ibSmaLowPriWeight } STATUS current DESCRIPTION "The ibSmaVLArbitGroup defines the MIB objects that describe the Virtual Lane High and Low Arbitrations." ::= { ibSmaGroups 8 } ibSmaLFTGroup OBJECT-GROUP OBJECTS { ibSmaLinForwEgressPort } STATUS current DESCRIPTION "The ibSmaLFTGroup defines the MIB objects that describe the Linear Forwarding Table." ::= { ibSmaGroups 9 } ibSmaRFTGroup OBJECT-GROUP OBJECTS { ibSmaRandomDestLID, ibSmaRandomForwEgressPort, ibSmaRandomLMC, ibSmaRandomIsValid } STATUS current DESCRIPTION "The ibSmaRFTGroup defines the MIB objects that describe the Random Forwarding Table." ::= { ibSmaGroups 10 } ibSmaMFTGroup OBJECT-GROUP OBJECTS { Expires April 2005 [Page 65] Internet-Draft IPOVERIB SMA MIB Module October 2004 ibSmaMulForwMask } STATUS current DESCRIPTION "The ibSmaMFTGroup defines the MIB objects that describe the Multicast Forwarding Table." ::= { ibSmaGroups 11 } ibSmaSMGroup OBJECT-GROUP OBJECTS { ibSmaSmGuid, ibSmaSmSmKey, ibSmaSmSmpCount, ibSmaSmPriority, ibSmaSmState } STATUS current DESCRIPTION "The ibSmaSMGroup defines the MIB objects that describe the Subnet Manager Information Table." ::= { ibSmaGroups 12 } ibSmaVendDiagGroup OBJECT-GROUP OBJECTS { ibSmaPortGenericDiagCode, ibSmaPortVendorDiagCode, ibSmaPortVendorDiagIndexFwd, ibSmaPortVendorDiagData } STATUS current DESCRIPTION "The ibSmaVendDiagGroup defines the MIB objects that describe the vendor diagnostics table." ::= { ibSmaGroups 13 } ibSmaLedGroup OBJECT-GROUP OBJECTS { ibSmaLedState } STATUS current DESCRIPTION "The ibSmaSMGroup defines the MIB objects that describe the LED table." ::= { ibSmaGroups 14 } ibSmaNotificationsGroup NOTIFICATION-GROUP NOTIFICATIONS { ibSmaPortLinkStateChange, ibSmaLinkIntegrityThresReached, ibSmaExcessBuffOverrunThres, ibSmaFlowCntrlUpdateTimerExpire, ibSmaCapabilityMaskModified, ibSmaSysImageGuidModified, Expires April 2005 [Page 66] Internet-Draft IPOVERIB SMA MIB Module October 2004 ibSmaBadManagementKey, ibSmaBadPartitionKey, ibSmaBadQueueKey, ibSmaBadPKeyAtSwitchPort } STATUS current DESCRIPTION "The notifications that an IPOIB SNMP agent transmits on the behalf of the SMA Trap message implementation." ::= { ibSmaGroups 15 } END 5. Acknowledgments The author [Bill Swortwood] would like to acknowledge Anne Marie Merritt who authored the VIA MIB on which this document was initially based. 6. Security Considerations SNMPv1 by itself is not a secure environment. Even if the network itself is secure (for example by using IPSec), even then, there is no control as to who on the secure network is allowed to access and GET/SET (read/change/create/delete) the objects in this MIB. It is recommended that the implementers consider the security features as provided by the SNMPv3 framework. Specifically, the use of the User-based Security Model RFC 2574 [RFC2574] and the View-based Access Control Model RFC 2575 [RFC2575] is recommended. It is then a customer/user responsibility to ensure that the SNMP entity giving access to an instance of this MIB, is properly configured to give access to the objects only to those principals (users) that have legitimate rights to indeed GET or SET (change/ create/delete) them. 7. IANA Considerations IANA is requested to make a MIB OID assignment under the transmission branch, that is, assign the infinibandMIB under { transmission 199 }. This sub-id is requested because 199 is the ifType for infiniband(199) and is available under transmission. In the future, IPOIB related standards track MIB modules should be rooted under the infinibandMIB subtree. The IANA is requested to manage that namespace. New assignments can only be made via a Standards Action as specified in [RFC2434]. This document also requests IANA to assign { infinibandMIB 3 } to the Expires April 2005 [Page 67] Internet-Draft IPOVERIB SMA MIB Module October 2004 IB-SMA-MIB specified in this document. 8. References 8.1. Normative References [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, March 1997. [RFC2578] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J., Rose, M. and S. Waldbusser, "Structure of Management Information Version 2 (SMIv2)", STD 58, RFC 2578, April 1999. [RFC2579] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J., Rose, M. and S. Waldbusser, "Textual Conventions for SMIv2", STD 58, RFC 2579, April 1999. [RFC2580] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J., Rose, M. and S. Waldbusser, "Conformance Statements for SMIv2", STD 58, RFC 2580, April 1999. [RFC2863] McCloghrie, K., and Kastenholz F., "The Interfaces Group MIB", RFC 2863, June 2000. [INFINIV1] InfiniBand Architecture Specification Volume 1, Release 1.1, November 6, 2002. 8.2. Informative References [RFC3410] Case, J., Mundy, R., Partain, D. and B. Stewart, "Introduction and Applicability Statements for Internet-Standard Management Framework", RFC 3410, December 2002. 9. Authors' Addresses Bill Swortwood Motorola, Inc. 900 South Diablo Way Phone: +1-602-438-3834 Tempe, AZ 85282 Email: Bill.Swortwood@motorola.com USA Sean Harnedy Mangrove Systems, Inc. 10 Fairfield Boulevard Phone: +1-203-679-7539 Wallingford, CT 06492 Email: sharnedy@mangrovesystems.com USA Expires April 2005 [Page 68] Internet-Draft IPOVERIB SMA MIB Module October 2004 Bhargavi Shah Fabric Networks 134 Flanders Road Phone: +1-508-599-6300 Westborough, MA 01581 Email: bshah@fabricnetworks.com USA 10. Intellectual Property Notice The IETF takes no position regarding the validity or scope of any Intellectual Property Rights or other rights that might be claimed to pertain to the implementation or use of the technology described in this document or the extent to which any license under such rights might or might not be available; nor does it represent that it has made any independent effort to identify any such rights. Information on the procedures with respect to rights in RFC documents can be found in BCP 78 and BCP 79. Copies of IPR disclosures made to the IETF Secretariat and any assurances of licenses to be made available, or the result of an attempt made to obtain a general license or permission for the use of such proprietary rights by implementers or users of this specification can be obtained from the IETF on-line IPR repository at http://www.ietf.org/ipr. The IETF invites any interested party to bring to its attention any copyrights, patents or patent applications, or other proprietary rights that may cover technology that may be required to implement this standard. Please address the information to the IETF at ietf-ipr@ietf.org. 11. Full Copyright Statement Copyright (C) The Internet Society (2004). This document is subject to the rights, licenses and restrictions contained in BCP 78, and except as set forth therein, the authors retain all their rights. This document and translations of it may be copied and furnished to others, and derivative works that comment on or otherwise explain it or assist in its implementation may be prepared, copied, published and distributed, in whole or in part, without restriction of any kind, provided that the above copyright notice and this paragraph are included on all such copies and derivative works. However, this document itself may not be modified in any way, such as by removing the copyright notice or references to the Internet Society or other Internet organizations, except as needed for the purpose of developing Internet standards in which case the procedures for copyrights defined in the Internet Standards process must be followed, or as required to translate it into languages other than English. Expires April 2005 [Page 69] Internet-Draft IPOVERIB SMA MIB Module October 2004 The limited permissions granted above are perpetual and will not be revoked by the Internet Society or its successors or assigns. This document and the information contained herein are provided on an "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Expires April 2005 [Page 70]