Network work group Mach Chen Renhai Zhang Internet Draft Huawei Technologies Co.,Ltd Expires: August 2007 February 1, 2007 OSPF Extensions in Support of Inter-AS (G)MPLS TE draft-chen-ccamp-ospf-interas-te-extension-01.txt Status of this Memo By submitting this Internet-Draft, each author represents that any applicable patent or other IPR claims of which he or she is aware have been or will be disclosed, and any of which he or she becomes aware will be disclosed, in accordance with Section 6 of BCP 79. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF), its areas, and its working groups. Note that other groups may also distribute working documents as Internet-Drafts. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." The list of current Internet-Drafts can be accessed at http://www.ietf.org/ietf/1id-abstracts.txt The list of Internet-Draft Shadow Directories can be accessed at http://www.ietf.org/shadow.html This Internet-Draft will expire on August 1, 2007. Abstract This document describes extensions to the OSPF protocol to support Multiprotocol Label Switching (MPLS) and Generalized MPLS (GMPLS) Traffic Engineering (TE) for multiple Autonomous Systems (ASes). It defines OSPF extensions for the flooding of inter-AS links which can be used to perform inter-AS path computation. Conventions used in this document The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in RFC-2119. Mach & Renhai Expires August 1, 2007 [Page 1] Internet-Draft Inter-AS Links connection information February 2007 Table of Contents 1. Introduction.................................................2 2. Problem statement............................................3 2.1. Per-Domain Path Determination...........................3 2.2. Backward Recursive Path Computation.....................4 3. Extensions to OSPF...........................................5 3.1. Remote AS Number Sub-TLV................................5 3.2. Inter-AS Link Type......................................6 3.3. Link ID.................................................6 4. Inter-AS links procedure.....................................6 5. Security Considerations......................................7 6. IANA Considerations..........................................7 6.1. OSPF LSA Sub-TLVs type..................................7 6.2. OSPF TE Link Type.......................................7 7. References...................................................9 7.1. Normative References....................................9 7.2. Informative References..................................9 Author's Addresses.............................................10 Intellectual Property Statement................................10 Disclaimer of Validity.........................................11 Copyright Statement............................................11 Acknowledgment.................................................11 1. Introduction [OSPF-TE] defines extensions to the OSPF protocol [OSPF] to support intra-area Traffic Engineering (TE). The extensions provide a way of encoding the TE information for TE-enabled links within the network (TE links) and flooding this information within an area. Type 10 opaque LSAs [RFC2370] are used to carry such TE information. Two top- level TLVs are defined in [OSPF-TE]: Router Address TLV and Link TLV. The Link TLV has several nested sub-TLVs which describe the TE attributes for a TE link. Requirements for establishing Multiprotocol Label Switching (MPLS) TE Label Switched Paths (LSPs) that cross multiple Autonomous Systems (ASes) are described in [INTERAS-TE-REQ]. As described in [INTERAS- TE-REQ], a method SHOULD provide the ability to compute a path spanning multiple ASes. So a path computation entity that may be the Head-end Label Switching Router (LSR), an AS Border Router (ASBR), or a Path Computation Element (PCE [PCE]) needs to know not only the TE information of the links within an AS, but also of the links that connect to other ASes. Mach & Renhai Expires August 1, 2007 [Page 2] Internet-Draft Inter-AS Links connection information February 2007 In this document, some extensions to [OSPF-TE] are defined in support of carrying inter-AS TE link information for inter-AS Traffic Engineering. A new sub-TLV is added to the Link TLV and a new link type is introduced. The detailed definitions and procedures are discussed in the following sections. 2. Problem statement As described in [INTERAS-TE-REQ], in the case of establishing an inter-AS TE LSP traversing multiple ASes, the Path message [RFC3209] may include the following elements in the Explicit Route Object(ERO) in order to describe the path of the LSP: - a set of AS numbers as loose hops; and/or - a set of LSRs including ASBRs as loose hops. Two methods for determining inter-AS paths are currently discussed. The per-domain method [PD-PATH] determines the path one domain at a time. The backward recursive method [BRPC] uses cooperation between PCEs to determine an optimum inter-domain path. The sections that follow examine how inter-AS TE link information could be useful in both cases. 2.1. Per-Domain Path Determination In the per-domain method of determining an inter-AS path for an MPLS- TE LSP, when an LSR that is an entry-point to an AS receives a PATH message from an upstream AS with an ERO containing a next hop that is an AS number, it needs to find which LSRs within the local AS are connected to the downstream AS so that it can compute a TE LSP segment across the AS to that LSR and forward the PATH message to the LSR and hence into the next AS. See the below figure for example: R1------R3----R5-----R7------R9-----R11 | | \ | / | | | \ | ---- | | | \ | / | R2------R4----R6 --R8------R10----R12 : : <-- AS1 -->:<---- AS2 --->:<--- AS3 ---> Figure 1: Inter-AS Reference Model The figure shows three ASes (AS1, AS2, and AS3) and twelve LSRs (R1 through R12). R3 and R4 are ASBRs in AS1. R5, R6, R7, and R8 are ASBRs in AS2. R9 and R10 are ASBRs in AS3. Mach & Renhai Expires August 1, 2007 [Page 3] Internet-Draft Inter-AS Links connection information February 2007 If an inter-AS TE LSP is planned to be established from R1 to R12, the AS sequence is limited as: AS1, AS2, AS3. Suppose that the Path message enters AS2 from R3. The next hop in the ERO shows AS3, and R5 must determine a path segment across AS2 to reach AS3. It has a choice of three exit points from AS2 (R6, R7, and R8) and it needs to know which of these provide TE connectivity to AS3, and whether the TE connectivity (for example, available bandwidth) is adequate for the requested LSP. Alternatively, if the next hop in the ERO is the entry ASBR for AS3 (say R9), R5 needs to know which of its exit ASBRs has a TE link that connects to R9. Since there may be multiple exist ASBRs that are connected to R9(both R7 and R8 in this example), R5 also needs to know the TE properties of the inter-AS TE links so that it can select the correct exit ASBR. Once the path message reaches the exit ASBR, any choice of inter-AS TE link can be made by the ASBR if not already made by entry ASBR that computed the segment. To enable R5 to make the correct choice of exit ASBR the following information is needed: - List of all inter-AS TE links for the local AS. - TE properties of each inter-AS TE link. - AS number of the neighboring AS connected to by each inter-AS TE link. - Identity (TE Router ID) of the neighboring ASBR connected to by each inter-AS TE link. This information is needed throughout the local AS if path computation function is fully distributed among LSRs in the local AS. 2.2. Backward Recursive Path Computation Another scenario using PCE techniques has the same problem. [BRPC] defines a PCE-based TE LSP computation method (called Backward Recursive Path Computation) to compute optimal inter-domain constrained MPLS-TE or GMPLS LSPs. In this path computation method, a specific set of traversed domains are assumed to be selected before computation starts. Each downstream PCE in domain(i) returns a multipoint-to-point tree of potential paths to its upstream neighbor PCE in domain(i-1). Each tree consists of the set of paths from all Mach & Renhai Expires August 1, 2007 [Page 4] Internet-Draft Inter-AS Links connection information February 2007 Boundary Nodes located in domain(i) to the destination where each path satisfies the set of required constraints for the TE LSP (bandwidth, affinities, etc.). So a PCE needs to select Boundary Nodes (that is, ASBRs) that provide connectivity from the upstream AS. In order that the tree of paths provided by one PCE to its neighbor can be correlated, the identities of the ASBRs for each path need to be referenced, so the PCE must know the identities of the ASBRs in the remote AS reached by any inter-AS TE link, and, in order that it provides only suitable paths in the tree, the PCE must know the TE properties of the inter-AS TE links. Thus, to support Backward Recursive Path Computation the same information as listed in Section 2.1 is required. 3. Extensions to OSPF The extensions defined in this document allow a TE link advertisement to be easily identified as such by the use of a new link type. A new sub-TLV to the Link TLV is defined to carry the information about the neighboring AS. 3.1. Remote AS Number Sub-TLV As described in [OSPF-TE], the Link TLV describes a single link and consists of a set of sub-TLVs. A new sub-TLV, the Remote AS Number sub-TLV is added to the Link TLV when advertising inter-AS links. The Remote AS Number sub-TLV specifies the AS number of the neighboring AS to which the advertised link connects. The Remote AS number sub-TLV is TLV type 21 (which needs to be confirmed by IANA), and is four octets in length. The format is as follows: 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Type | Length | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Remote AS Number | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ The Remote AS number field has 4 octets. When two octets are used for the AS number, as in current deployments, the left two octets MUST be set to zero. Mach & Renhai Expires August 1, 2007 [Page 5] Internet-Draft Inter-AS Links connection information February 2007 3.2. Inter-AS Link Type To identify a link to be an inter-AS link and allow easy identification of these new advertisements, a new Link Type value is defined for use in the Link Type sub-TLV. The value of the Link Type for an inter-AS point-to-point link is 3 (which needs to be confirmed by IANA). 3.3. Link ID For an inter-AS link, the Link ID carried in the Link ID sub-TLV is the TE Router ID of the remote ASBR reached through this inter-AS link. 4. Inter-AS links procedure When TE is enabled on an inter-AS link and the link is up, the ASBR SHOULD advertise this link using the normal procedures for OSPF-TE [OSPF-TE]. When either the link is down or TE is disabled on the link, the ASBR SHOULD withdraw the advertisement. When there are changes to the TE parameters for the link (for example, when the available bandwidth changes) the ASBR SHOULD re-advertise the link, but the ASBR MUST take precautions against excessive re-advertisements as described in [OSPF-TE]. The information advertised comes from the ASBR's knowledge of the TE capabilities of the link, the ASBR's knowledge of the current status and usage of the link, and configuration at the ASBR of the remote AS number and remote ASBR TE Router ID. The TE link advertisement SHOULD be carried in a Type 10 Opaque LSA if the flooding scope is to be limited to within the single IGP area to which the ASBR belongs, or MAY be carried in a Type 11 Opaque LSA if the information should reach all routers (including area border routers, ASBRs, and PCEs) in the AS. Legacy routers receiving an advertisement for an inter-AS TE link are able to ignore it because the Link Type carries an unknown value. They will continue to flood the LSA, but will not attempt to use the information received as if the link were an intra-AS TE link. Routers or PCEs that are capable of processing advertisements of inter-AS TE links SHOULD NOT use such links to compute paths that exit an AS to a remote ASBR and then immediately re-enter the AS. Such paths would constitute extremely rare occurrences and MUST only be allowed as the result of specific policy configuration at the router or PCE computing the path. Mach & Renhai Expires August 1, 2007 [Page 6] Internet-Draft Inter-AS Links connection information February 2007 5. Security Considerations The protocol extensions defined in this document are relatively minor and can be secured within the AS in which they are used by the existing OSPF security mechanisms. It should be noted, however, that some of the information included in these new advertisements (the remote AS number and the remote ASBR ID) are obtained from a neighboring administration and cannot be verified in anyway. Since the means of delivery of this information is likely to be part of a commercial relationship, the source of the information should be carefully checked before it is entered as configuration information at the ASBR 6. IANA Considerations IANA is requested to make the following allocations from registries under its control. 6.1. OSPF LSA Sub-TLVs type IANA maintains the "Open Shortest Path First (OSPF) Traffic Engineering TLVs" registry with sub-registry "Types for sub-TLVs in a TE Link TLV". IANA is requested to assign a new sub-TLV as follows. The number 21 is suggested. Value Meaning 21 Remote AS Number sub-TLV. 6.2. OSPF TE Link Type IANA is requested to create a new sub-registry "TE Link Types" of the registry "Open Shortest Path First (OSPF) Traffic Engineering TLVs" to track TE Link Types. The sub-registry should read as follows: [RFC3630] defines the Link Type sub-TLV of the Link TLV. The following values are defined. Value Meaning Reference 1 Point-to-point link [RFC3630] 2 Multi-access link [RFC3630] Mach & Renhai Expires August 1, 2007 [Page 7] Internet-Draft Inter-AS Links connection information February 2007 3 Inter-AS link [this document] New allocations from this registry are by IETF Standards Action. Mach & Renhai Expires August 1, 2007 [Page 8] Internet-Draft Inter-AS Links connection information February 2007 7. References 7.1. Normative References [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, March 1997. [RFC3209] Awduche, D., Berger, L., Gan, D., Li, T., Srinivasan, V., and G. Swallow, "RSVP-TE: Extensions to RSVP for LSP Tunnels", RFC 3209, December 2001. [RFC2370] R. Coltun, "The OSPF Opaque LSA Option", RFC2370, July 1998. [OSPF] Moy, J., "OSPF Version 2", STD 54, RFC 2328, April 1998. [OSPF-TE] Katz, D., Kompella, K., and Yeung, D., "Traffic Engineering (TE) Extensions to OSPF Version 2", RFC 3630, September 2003. 7.2. Informative References [INTERAS-TE-REQ] Zhang and Vasseur, "MPLS Inter-AS Traffic Engineering Requirements", RFC4216, November 2005. [PER-DOMAIN] Ayyangar, A., Vasseur, JP., and Zhang, R., "A Per-domain path computation method for establishing Inter-domain", draft-ietf-ccamp-inter-domain-pd-path-comp, (work in progress). [BRPC] JP. Vasseur, Ed., R. Zhang, N. Bitar, JL. Le Roux, "A Backward Recursive PCE-based Computation (BRPC) procedure to compute shortest inter-domain Traffic Engineering Label Switched Paths ", draft-ietf-pce-brpc, (work in progress) [PCE] Farrel, A., Vasseur, JP., and Ash, J., "A Path Computation Element (PCE)-Based Architecture", RFC4655, August 2006. Mach & Renhai Expires August 1, 2007 [Page 9] Internet-Draft Inter-AS Links connection information February 2007 Author's Addresses Mach Chen Huawei Technologies Co.,Ltd KuiKe Building, No.9 Xinxi Rd., Hai-Dian District Beijing, 100085 P.R. China Email: mach@huawei.com Renhai Zhang Huawei Technologies Co.,Ltd KuiKe Building, No.9 Xinxi Rd., Hai-Dian District Beijing, 100085 P.R. China Email: zhangrenhai@huawei.com Intellectual Property Statement The IETF takes no position regarding the validity or scope of any Intellectual Property Rights or other rights that might be claimed to pertain to the implementation or use of the technology described in this document or the extent to which any license under such rights might or might not be available; nor does it represent that it has made any independent effort to identify any such rights. Information on the procedures with respect to rights in RFC documents can be found in BCP 78 and BCP 79. Copies of IPR disclosures made to the IETF Secretariat and any assurances of licenses to be made available, or the result of an attempt made to obtain a general license or permission for the use of such proprietary rights by implementers or users of this specification can be obtained from the IETF on-line IPR repository at http://www.ietf.org/ipr. The IETF invites any interested party to bring to its attention any copyrights, patents or patent applications, or other proprietary rights that may cover technology that may be required to implement this standard. Please address the information to the IETF at ietf-ipr@ietf.org. Mach & Renhai Expires August 1, 2007 [Page 10] Internet-Draft Inter-AS Links connection information February 2007 Disclaimer of Validity This document and the information contained herein are provided on an "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY, THE IETF TRUST AND THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Copyright Statement Copyright (C) The IETF Trust (2007). This document is subject to the rights, licenses and restrictions contained in BCP 78, and except as set forth therein, the authors retain all their rights. Acknowledgment Mach & Renhai Expires August 1, 2007 [Page 11]