Patch-ID# 109975-10 Keywords: panic II unit test suspend shadows Synopsis: Instant Image 2.0: panic while suspending all shadows Patch Date: Mar/01/2002 Solaris Release: 2.6 SunOS Release: 5.6 Unbundled Product: StorEdge Instant Image Unbundled Release: 2.0 Xref: Topic: Relevant Architectures: sparc.sun4u NOTE: IMPORTANT NOTICE: ************************************************************************ * When installing Data Services 2.0 patches, be sure to install ALL * * Data Services patches, closely following the installation steps * * documented in this README file, prior to performing a system reboot. * ************************************************************************ NOTE: SPECIAL INSTALLATION INSTRUCTIONS FOR DATA SERVICES PATCHES Because this patch updates kernel modules, the user must boot the system up in single-user mode to apply the patch, and then reboot the system. This patch must be installed from a read/write directory. It is highly recommended that the patch directory be copied to /tmp on the machine being patched and installed from there. 1) Boot the machine into single user mode 2) Install the Core patch first example #patchadd 109967-09 3) Install the latest product patch after installing Core patch example #patchadd 109983-08 4) Repeat Step 3 for all installed Data Services products example #patchadd 109975-07 5) Reboot the system after you complete adding the patches. NOTE: If you are running SNDR 2.0, there is a chance that the system will hang during shutdown from single-user mode due to certain module dependencies. To avoid this, execute the following command from single-user mode BEFORE issuing the shutdown command: # /usr/opt/SUNWesm/sbin/rdcadm -p NOTE: If you are using Instant Image 2.0 or Fast Write Cache 2.0 with Component Manager 2.2, it is recommended that the Instant Image and Fast Write Cache command line interface (CLI) be used in place of the Sun StorEdge Management Console. NOTE: Refer to "Patch Installation Instructions" section for generic information on installing this patch. NOTE: Refer to "Special Product Install Instructions" section for information on installing Data Services products. BugId's fixed with this patch: 4227561 4307578 4316836 4336398 4336795 4338241 4345262 4357687 4368169 4392392 4470319 4472080 4476367 4481175 4494556 Changes incorporated in this version: 4481175 4494556 Patches accumulated and obsoleted by this patch: Patches which conflict with this patch: Patches required with this patch: 109967-12 or greater Obsoleted by: Files included with this patch: /usr/kernel/drv/ii /SUNWesm/SUNWiimsu/lib/classes/dsw.jar /SUNWesm/SUNWiimsu/man/man1m/ii_config.1m /SUNWesm/SUNWiimsu/man/man1m/ii_control.1m /SUNWesm/SUNWiimsu/man/man1m/ii_health.1m Problem Description: 4494556 109969-11 preinstall fails patch level error 4481175 Instant Image 2.0 caused panic while suspending all shadows with I/O still going (from 109975-09) 4476367 E10000 domain panics with bad trap at _dsw_km_cnt_bits (from 109975-08) 4472080 fsck BAD SUPER BLOCK with latest Data Services patches. (with or without FWC) 4470319 DS allows I/O beyond end of volume (from 109975-07) 4227561 Instant Image copies data at xfer rates < 2MB/sec (from 109975-06) NoBugID No bugs fixed (from 109975-05) 4392392 install of patches 109967-03 & 109975-03, cause iiadm to report wrong percentage 4368169 iiadm command returns "SxSH: ERROR: protocol exception" 4307578 Needless "." exists just after "esm_cli" in online man pages (from 109975-04) NoBugID No bugs fixed (from 109975-03) NoBugID Updates to README file (from 109975-02) 4357687 "umount volumes; disable sv volumes" still leaves volumes open (from 109975-01) 4345262 Multiple 25GByte II independent volume copy causes JNI-panic & esm_gui lock up 4338241 No Version information in jar MANIFEST 4336795 SUNWj2rt: NullPointerException & Display Problem on selections 4336398 Coding kludge causes screen refresh problems - JTree appearing eroneously in ano 4316836 II image of >20Gb volume hangs Patch Installation Instructions: -------------------------------- Refer to the Install.info file for instructions on using the generic 'installpatch' and 'backoutpatch' scripts provided with each patch. Any other special or non-generic installation instructions should be described below as special instructions. Special Product Install Instructions: ------------------------------------- PRODUCT INSTALLATION INSTRUCTIONS - ADDING DATA SERVICES NOTE: The following section applies to customers who currently have one or more Data Services products installed, have patched those products one or more times, and wish to add an additional Data Services product. If this is a new installation of Data Services products, go to the next section entitled, "PRODUCT INSTALLATION INSTRUCTIONS - NEW INSTALLATION. For installation of new/additional Data Services 2.0 products on a system that has existing Data Services patches installed: 1) Determine if existing Data Services products were loaded from original 2.0 CD or from re-released 2.0 CD. To determine this: 1a) Run the following for the appropriate OS: Command OS ------------------------------------------- showrev -p | grep 109967-06 Solaris 2.6 showrev -p | grep 109969-06 Solaris 7 showrev -p | grep 109970-06 Solaris 8 o If the patch does not exist, go to step 2). o If the patch exists, go to step 1b). 1b) Run the following for the appropriate OS: Command OS ------------------------------------------- ls -d /var/sadm/patch/109967-06 Solaris 2.6 ls -d /var/sadm/patch/109969-06 Solaris 7 ls -d /var/sadm/patch/109970-06 Solaris 8 o If the directory exists, remove all the Data Services patches as directed in step 2). o If the directory does not exist, remove all the -07 and higher revisions of the Data Services patches as directed in step 2). Do not attempt to remove any -06 or lower revisions of the Data Service patches. 2) Back out all the Data Services patches using the patchrm command. The Data Services patch numbers are: Solaris 2.6: Core: 109967-XX FWC: 109971-XX Instant Image: 109975-XX SNDR: 109979-XX STE: 109983-XX Solaris 7: Core: 109969-XX FWC: 109973-XX Instant Image: 109977-XX SNDR: 109981-XX STE: 109985-XX Solaris 8: Core: 109970-XX FWC: 109974-XX Instant Image: 109978-XX SNDR: 109982-XX STE: 109986-XX 3) Reboot the system into single user mode 4) Install additional 2.0 Data Services product(s) 5) Reinstall the appropriate patches (numbers listed above) 6) Reboot the system PRODUCT INSTALLATION INSTRUCTIONS - NEW INSTALLATION NOTE: The following applies to customers who currently have no Data Services patches installed. If Data Services have already been installed and patched one or more times, go to the previous section entitled, "PRODUCT INSTALLATION INSTRUCTIONS - ADDING DATA SERVICES." For installation of Data Services 2.0 products on a system that has no Data Services products previously installed: 1) Install ALL desired Data Services 2.0 products 2) Install ALL Data Services patches (including core patch) for the installed 2.0 Data Services 3) Reboot the system Special Install Instructions: ----------------------- None. README -- Last modified date: Friday, March 1, 2002